NefMoto > Technical > Reverse Engineering > 2step & Antilag Auto Add Script. for ME7.X
Pages: 1 ... 32 33 [34] 35
« previous next »
Author Topic: 2step & Antilag Auto Add Script. for ME7.X  (Read 412270 times)
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick
« Reply #495 on: October 09, 2016, 08:22:51 AM »
least significant bit first. Are you sure you want to use this code if you cant set up a spoon fed definition yourself?
Logged
My project (all photos back online!)
PoLo35
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 26
« Reply #496 on: October 12, 2016, 11:55:35 AM »
Hi everybody.

I've tried several EN / XLS file without any success on my car.

So I decided to try myself launch.php the script but also without success, I always have this message back, someone can give me a helping hand?
Logged
VaG Noob...
PoLo35
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 26
« Reply #497 on: October 15, 2016, 01:08:04 PM »
Quote from: PoLo35 on October 12, 2016, 11:55:35 AM
Hi everybody.

I've tried several EN / XLS file without any success on my car.

So I decided to try myself launch.php the script but also without success, I always have this message back, someone can give me a helping hand?

always someone to guide me?
I do not think that this method works on my car but I would still try because I've tested 7 File 3 different people and none works.
Logged
VaG Noob...
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #498 on: October 15, 2016, 04:24:36 PM »
hey,

i've been messing with this for a while.. tried on my own( adding and changing code) and using this script.

I found that launch.php v5 with all the files( located around page 11 i think) was the correct one to use.. I tried this on 4 diffrent 1.8t ecus:

hs
dl
sm
cm

had 100% success with 3 of the 4. the only one with any kind of issue was the SM box. (06A 906 032 SM- 05 MKIV GLI-6PEED)

every time i tried it on that box, it wouldn't put the entire code in, in the correct spot... i.e., it would put half in empty space, and the other half over a different address( already in use).

i have a working HS box.. stock tune, in my car now, and has been runnig great wih no issues for the last 4 days.

These are all on 1.8t files. all bin's ive tried are on a me7.5 2.0l mk4 box, over written with diffrent bin files for testing...and all worked with version 5, that were problematic with other versions.

**ALSO** THIS ONLY SEEMED TO WORK WITH THE PHP VERSION!!!!! never got the cmd version to correctly execute. im not sure why. For those afraid of the php version, justdownload php, put cmd, launch.php, and BOTH ecu files needed into the php folder, and run.. its not as complicated as one would think.. Trust me, i barley know my way around an ecu file, or winols...but this isn't hard for the most average user....so dont be scared!

also, doesnt hurt to have mpps and a bootmode bench just incase Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #499 on: October 15, 2016, 05:40:36 PM »
I really wish nobody would use this script that doesn't already know assembler.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #500 on: October 16, 2016, 08:01:54 AM »
Quote from: nyet on October 15, 2016, 05:40:36 PM
I really wish nobody would use this script that doesn't already know assembler.

understandable.....as the inherent risks....but im sorry, im sure you must have known assembler and all coding languages before you ever used any code, you know, say out of a book or from a curriculum  to make/use a test programs to learn Roll Eyes
Logged
PoLo35
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 26
« Reply #501 on: October 16, 2016, 09:44:25 AM »
Quote from: up50lut3 on October 16, 2016, 08:01:54 AM
understandable.....as the inherent risks....but im sorry, im sure you must have known assembler and all coding languages before you ever used any code, you know, say out of a book or from a curriculum  to make/use a test programs to learn Roll Eyes

I've tried several file did for my car several different people and none works. Including php spoken of you.
Logged
VaG Noob...
Buzzard
Jr. Member
**

Karma: +7/-0
Offline Offline

Posts: 28
« Reply #502 on: October 18, 2016, 08:15:50 AM »
Works ! You need to read the thread properly, absorb the information and advice until you have fully understood what you need to do.

Well done guys this is truly great stuff !

Sent from my SM-N910F using Tapatalk
Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #503 on: October 19, 2016, 08:38:37 PM »
Quote from: Buzzard on October 18, 2016, 08:15:50 AM
Works ! You need to read the thread properly, absorb the information and advice until you have fully understood what you need to do.

Well done guys this is truly great stuff !

Sent from my SM-N910F using Tapatalk
^^^^^^this


Sent from my iPad using Tapatalk
Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #504 on: October 19, 2016, 08:44:07 PM »
Quote from: PoLo35 on October 16, 2016, 09:44:25 AM
I've tried several file did for my car several different people and none works. Including php spoken of you.


 I see why it's not working for you, your not typing the command ...your just typing launch launch.php....... Nothing else....READ


Sent from my iPad using Tapatalk
Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #505 on: October 20, 2016, 01:30:10 PM »
can someone help me out with 2 things?

here are the address it placed my script. I need to change the rpm that antilag is set to hold at. would i change the bits at address 0x17E72?

and another thing, when i use NLS, when i grab the next gear, its like it looses boost, and then i have to wait a second for it to come back, NLS works, just needs to be tweaked..any suggestions?

here is the scripts locations and here is the code @ 0x17EXX

is in in the order i think it is, or is the variables for each located in 2 diffrent places?

i.e.:
0x17E70 to 0x17E78:
0x17E70: Speed Threshold - Limits the speed where AntiLag is active. If vehicle speed is < SpeedThreshold, the AntiLag is enabled. Normally set to a low value, e.g. 3 km/h. To disable AntiLag, set the SpeedThreshold to zero.
0x17E72: Launch RPM - Sets the launch engine speed. If engine speed is higher than the LaunchRPM, the ignition is interrupted. To disable this function, set LaunchRPM to a high value, e.g. 15000 rpm
0x17E74: IgnitionCutDuration - This sets the time for which the ignition is cut while clutch is pressed (NoLiftShift), if also the following conditions are fulfilled:
Brake is not engaged
Engine speed is higher than RPMThreshold
Accel Pedal is engaged more than AccPedalThreshold
Set IgnitionCutDuration to zero to disable the NoLiftShift function.
0x17E76: RPM Threshold - Sets the minimum engine speed threshold for the NoLiftShift function. If the engine speed is lower than RPMThreshold, NoLiftShift is disabled.
0x17E78: AccPedalPosition - Sets the minimum accelerator pedal angle for NoLiftShift. If the accel. pedal is engaged lesser than AccPedalThreshold, NoLiftShift is disabled.


thanks in advanced!
Logged
funnix
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 76


1.8t AUM
« Reply #506 on: October 20, 2016, 11:18:22 PM »
You have to generate an XDF for the following values found on few pages before:


default values are(Customized for you):
From 0x17E00 to 0x17E01: Speed Treshold: 3.3 km/h; Conversion X*0.0078125
From 0x17E02 to 0x17E03: Launch RPM: 4500 1/min; Conversion X*0.25
From 0x17E04 to 0x17E05: IginitionCutDuration: 200ms; Conversion X*20
From 0x17E06 to 0x17E07: RPM Threshold: 5500 1/min; Conversion X*0.25

all 16bit LSB.

0x17E08: AccPedalThreshold: 90.20 %; Conversion X*0.392157
0x17E09: WaterTempThreshold: 75°C; Conversion X*0.75-48

8 bit.
Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55
« Reply #507 on: October 22, 2016, 02:30:07 PM »
Quote from: funnix on October 20, 2016, 11:18:22 PM
You have to generate an XDF for the following values found on few pages before:


default values are(Customized for you):
From 0x17E00 to 0x17E01: Speed Treshold: 3.3 km/h; Conversion X*0.0078125
From 0x17E02 to 0x17E03: Launch RPM: 4500 1/min; Conversion X*0.25
From 0x17E04 to 0x17E05: IginitionCutDuration: 200ms; Conversion X*20
From 0x17E06 to 0x17E07: RPM Threshold: 5500 1/min; Conversion X*0.25

all 16bit LSB.

thank you!
0x17E08: AccPedalThreshold: 90.20 %; Conversion X*0.392157
0x17E09: WaterTempThreshold: 75°C; Conversion X*0.75-48

8 bit.
Logged
xangelox
Newbie
*

Karma: +0/-5
Offline Offline

Posts: 5
« Reply #508 on: November 22, 2016, 12:43:56 PM »
Hi im new here.

who can help me with AL NLS and the Skript.

i have a skoda superb 1.8t

thanks
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
« Reply #509 on: November 22, 2016, 02:47:25 PM »
Quote from: xangelox on November 22, 2016, 12:43:56 PM
Hi im new here.

who can help me with AL NLS and the Skript.

i have a skoda superb 1.8t

thanks

You can read everything and help yourself....
Logged
Pages: 1 ... 32 33 [34] 35
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 07:08:54 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)