|
RaraK
|
 |
« Reply #30 on: May 22, 2013, 06:30:24 PM »
|
|
|
agreed but recently I decided to buy a tune from someone on one of the other forums and to be honest I wasnt impressed with some of the changes made. Look clearly the guy knows his stuff but when I see things like KFMLDMX just put to 1200kgh except in the first row/column it makes me wonder....
and as you say this is for my own car and I prefer being able to firstly learn how it all works and secondly be able to play and make changes as I go.
sadly with dsg though, tools are a lot of money, as are the damos for them! and finding anyone who can tune them to give you something to work off of is much fewer. i wont lie, typically on tunes for people out of my country on cars i have not worked on in person, i do make some maps higher than normal, just forgiving thats all. thats what you get on "mail order" tunes though really. |
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
 Offline
Posts: 81
|
|
« Reply #31 on: August 12, 2014, 08:10:18 PM »
|
|
|
From what I can tell you can't read Dq200 and DQ250 over OBD2, you have to connect it directly to the TCU. I know my Galletto 4 tool shows up when I open EOBD1300.exe. I'm just waiting on some parts to build a cable to connect to the TCU and then I'll see if you can read and write a file. Should be doing that this weekend.
|
|
|
|
|
Logged
|
|
|
|
|
Rick
|
|
« Reply #32 on: August 13, 2014, 01:26:26 AM »
|
|
|
Byteshooter does DQ250 Cxx OBD
|
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #33 on: August 13, 2014, 08:59:31 AM »
|
|
|
Byteshooter does DQ250 Cxx OBD
Haver you tried it? I know that several big tuning house here in the USA that use Byteshooter and they connect directly to the TCU. |
|
|
|
|
Logged
|
|
|
|
|
Rick
|
|
« Reply #34 on: August 13, 2014, 10:52:21 AM »
|
|
|
Yes, many times.
|
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #35 on: August 18, 2014, 12:19:35 PM »
|
|
|
Just to give an update I was able to read my DQ250 on my 2006 Audi A3 with EODB1300.exe, a custom built harness connected to the TCU, and a FT232RL-Chip cable. This is the files that I read. (All for under $50)
HW #: 02E300042Q 0926
SW #: 02E927770AD
|
|
|
|
|
Logged
|
|
|
|
|
Rick
|
|
« Reply #36 on: August 18, 2014, 02:48:05 PM »
|
|
|
File is good  |
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #37 on: August 19, 2014, 04:45:33 PM »
|
|
|
Ok So I posted the file that I read with my own cable for the DQ250. So here it is.
Parts (All of them I got on ebay)
Transmission Connector Pigtail - The part number for the connector is 1J0 927 320 and then you just need to wires that fit. The best way to get the wires it to get a pig tail from a VW round transmission pigtail. There are not a lot of them out there but if you look hard enough you'll find them
12-Volt Lighter to Alligator Clips - I cut off the lighter and just used the Alligator Clips
OBD2 100cm 16Pin Male to Female Extension Cable - Just cut the male end off (ouch!)
FT232RL-Chip OBD2 Cable -
Software
EOBD1300.exe (See previous post for the exe)
After that I used these images and wired up the cable.
|
|
|
|
|
Logged
|
|
|
|
|
terminator
|
|
« Reply #38 on: August 19, 2014, 04:52:36 PM »
|
|
|
If I have understood you correctly, licensed FGtech can read and write DSG?
I dont know how BS works, but CMD is able only to write DSG via OBD and download the file from the server (virtual read).
|
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #39 on: August 19, 2014, 04:54:39 PM »
|
|
|
If I have understood you correctly, licensed FGtech can read and write DSG?
I dont know how BS works, but CMD is able only to write DSG via OBD and download the file from the server (virtual read).
I couldn't get FGtech to work, I used a cheap FT232RL-Chip OBD2 Cable. |
|
|
|
|
Logged
|
|
|
|
|
terminator
|
|
« Reply #40 on: August 19, 2014, 05:03:35 PM »
|
|
|
Maybe I'm blind but there is no EOBD1300.exe on the forum. |
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #41 on: August 19, 2014, 05:16:45 PM »
|
|
|
Sorry I think it is called DSG READ.rar
|
|
|
|
|
Logged
|
|
|
|
|
terminator
|
|
« Reply #42 on: August 19, 2014, 05:24:45 PM »
|
|
|
Thanks, its on the first page of the thread.
|
|
|
|
|
Logged
|
|
|
|
|
Rick
|
|
« Reply #43 on: August 23, 2014, 02:35:53 PM »
|
|
|
Works on early Cxx, but not Exx, Fxx, DQ200, DQ500 etc.
|
|
|
|
|
Logged
|
|
|
|
everydayparadise
Full Member
Karma: +3/-0
Offline
Posts: 81
|
|
« Reply #44 on: August 25, 2014, 08:41:44 AM »
|
|
|
Works on early Cxx, but not Exx, Fxx, DQ200, DQ500 etc.
Do you know if this is because the software needs to be updated or you need a cable that has a different protocol? On another note, who made "EOBD1300.exe"? |
|
|
|
|
Logged
|
|
|
|
|
