Pages: 1 [2]
Author Topic: Me7 bench harness  (Read 24935 times)
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #15 on: April 19, 2013, 10:53:00 AM »

How can I power it with out it being in the harness? Disassemble the ecu?

or, leave the stock connector out of it, and just power the pins.


I didn't get bootmode success until I added a switch to the pin3 power. the other +12 pins are energized as long as the supply is on.
« Last Edit: April 19, 2013, 11:04:00 AM by cyril279 » Logged
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #16 on: April 19, 2013, 12:30:42 PM »

I made a harness based off of the diagram I posted earlier. I'm going to go test it
Logged
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #17 on: April 19, 2013, 12:32:17 PM »


I like that harness. Where can I get one like that?
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #18 on: April 19, 2013, 12:37:43 PM »

it's just an atx pc power supply, and this obd connector.
Logged
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #19 on: April 19, 2013, 01:26:05 PM »

What's that braided wire though?
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #20 on: April 19, 2013, 05:12:41 PM »

The wires are the leads from the power supply. The wire sleeving can be purchased from mcmaster carr, it just keeps a job clean.
Logged
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #21 on: April 20, 2013, 09:00:13 AM »

The wires are the leads from the power supply. The wire sleeving can be purchased from mcmaster carr, it just keeps a job clean.

That looks a lot better than what I have going on. I haven't gotten to test it yet. I think it will work though. Fingers are crossed if it doesn't a may try to make one like yours.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #22 on: April 20, 2013, 09:38:00 AM »

I hope you have a real ECU connector though..
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #23 on: April 20, 2013, 11:28:00 AM »

I do. That's what caused all my questions from the beginning because it still had every single wire attached to it
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #24 on: April 20, 2013, 11:33:24 AM »

Take the connector apart and remove all the unused wires. Much cleaner/safer.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Jrmillsr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #25 on: April 20, 2013, 12:04:28 PM »

I've done that. I think I am going to go wire by wire and replace all and get a sleeve like his
Logged
imnuts
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #26 on: May 10, 2013, 01:19:23 PM »

Does anyone know how many amps the ECU uses? I have the chance to get a great deal on some 12V power supplies, but I don't know how many amps the ECU uses, so I don't know if what I can get will work. The options I have are 1.7A and 3.4A, both 12VDC output.
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #27 on: May 10, 2013, 02:33:37 PM »

Either of those will work for a normal ECU, as the ECU does not have anything connected to it.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
imnuts
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #28 on: May 10, 2013, 02:49:06 PM »

Either of those will work for a normal ECU, as the ECU does not have anything connected to it.

Thank you Smiley Now to see how much the other parts would cost.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.05 seconds with 17 queries. (Pretty URLs adds 0s, 0q)