Hi, i used the nefmoto tool and uploaded a tune, unfortunately I didn't remember to check the checksum and flashed it to the car. I started it, took it a brief drive and it wouldn't start, I had the car recovered and found the P0601 code which has had me reading the site all day.
My understanding is that if I connect via netmofo again and reflash with the original file (downloaded from reading before any updates) or a fixed version of the tune that the P0601 would clear, is this correct? I have reflashed as I describe, turned the key off for about 20 seconds and then subsequently left the ignition on for about an hour but the code remains. I looked at the netmofo logs and everything looked fine.
Any help would be much appreciated as the car no longer starts and is now just an ornament.
Many thanks, Paul
Car: Ibiza 1.8T
Cable used: Blue K line cable
To add some extra info. I used Me7Check prior to flashing and it reported the file to be ok. However me7sum found errors when I found info about it and subsequently ran it. The original map which I flashed back on, I have read this with me7check and logs below.
ME7Check v1.08 (c) mki, 06/2004-04/2011
Checking file C:\Users\Paul\Desktop\Orignal map2.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 39/1/ME7.5/51/X505R//24C/Dst03o/190504/
-> Contents of ECUID data table:
- '0261208521' (SSECUHN)
- '1037371739' (SSECUSN)
- '06A906032RP ' (VAG part number)
- '0010' (VAG sw number)
- '1.8I R4/5VT ' (engine id)
-> Contents of ECUID data table:
- 'HW_MAN004'
-> No errors found. File is OK. *********************
