Pages: [1] 2
Author Topic: A few questions please 06a906032hn Octavia vRS 180PS  (Read 14328 times)
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« on: August 22, 2013, 01:07:06 PM »

I have attached two .bin files and a definition file.
One is my standard map, the other is a tuned map on a friends car.

1. I'm not sure if I'm using the right definition file. Can anyone confirm?
2. Assuming the definition file is correct, I can't see many changes. What have they done to make it better?
3. After I've made sure the checksums etc are good on my friends file, can I just flash it to my ECU? From my reading, I shouldn;t have any troubles with immobiliser etc.

Thanks a lot  Cool
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: August 22, 2013, 01:15:36 PM »

Your Octavia file is 06A906032HN. The definition file you're trying to use is for an S4 file, 8D0907551M. They are not compatible. You need a definition file for YOUR file.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #2 on: August 22, 2013, 01:46:52 PM »

Thanks for the heads up. Any tips on how I can find the right file? I've tried searching vRS, Octavia, auq, etc etc but can't seem to find it.
Logged
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #3 on: August 22, 2013, 01:52:07 PM »

I've just came across this file 8D0907551M_AlNls_v2.xdf
Is this correct?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: August 22, 2013, 01:59:42 PM »

Does 8D0907551M sound like 06A906032HN?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #5 on: August 22, 2013, 02:09:49 PM »

My bad, I didn't realise that was a part no. So basically I need 06A906032HN.xdf?
I must have spent the best part of 6 hours of constant reading and still feel lost lol  Tongue
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #6 on: August 23, 2013, 12:13:16 AM »

I dont think there is a HN xdf ,at least I couldnt find any.Use this
http://nefariousmotorsports.com/forum/index.php?topic=4171.0title=

the HS one as a reference and create one for yours.  Smiley
Logged

VAG cars newbie tuner Smiley
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #7 on: August 23, 2013, 12:36:44 AM »

Thanks, you've been a great help. Will have a look later this evening.
Logged
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #8 on: August 27, 2013, 02:54:13 AM »

I dont think there is a HN xdf ,at least I couldnt find any.Use this
http://nefariousmotorsports.com/forum/index.php?topic=4171.0title=

the HS one as a reference and create one for yours.  Smiley

Hi, I downloaded that map pack, but I can't seem to do anything with it in TunerPro. It does import into Winols though. Can this be made to work tunerpro? It looks a lot easier to use. I've done some more reading but haven't found a way yet.

On another note, can tunerpro be used without a definition file?
Logged
madswp
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 102



« Reply #9 on: August 27, 2013, 03:24:52 AM »

Open your definition in winols.
Open tunerpro. And copy the map adresses, offsets etc etc from winols and create your own xdf in tunerpro.
If they don't match then open ols file in winols and your original binary. Compare files and find the maps you need in your Ori then copy addresses to tunerpro
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #10 on: August 27, 2013, 04:55:33 AM »

I have uploaded ols file which includes full map pack for hn somewhere in dfn subforum
Logged

mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #11 on: August 27, 2013, 05:52:44 AM »

Don't suppose you've got a link, or can remember the thread title so I can do a search?
Logged
madswp
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 102



« Reply #12 on: August 27, 2013, 08:39:05 AM »

give me the names of the maps you'll need and ill make an xdf!

if you think reading 6 hours is hard work, then wait till you have read/spent ++100 hours on these forums, and realiasing that more you read/learn, the more you realise you dont know
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #13 on: August 27, 2013, 08:52:23 AM »

if you think reading 6 hours is hard work, then wait till you have read/spent ++100 hours on these forums, and realiasing that more you read/learn, the more you realise you dont know

Couldn't have said it better. The more you learn, the more you realize you don't know.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mushtafa
Full Member
***

Karma: +3/-4
Offline Offline

Posts: 121


« Reply #14 on: August 27, 2013, 09:00:27 AM »

Haha, I know exactly what you mean. I'm sure the more I read, the more confused I get lol

I want to find the CDKAT bit to remove the rear o2 sensor. I also wanted to check the boost settings. We've got uneven boost readings across the rev range, not sure if it's due to the map or a hardware issue yet.

And, if I can work it myself with more reading, I want to add antilag/launch on the spare space of the memory.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)