Pages: [1]
Author Topic: Where is my Problem?  (Read 9348 times)
howtotman
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: August 24, 2013, 04:05:31 PM »

Hi,

I'm absolut new in this stuff. My english is not the best please be permissive :-)

I tried to read the ECU from my 1998 S4 B5 with NefMoto ME7 ECU Flasher.
It conects but after 5 seconds the conection breaks up with:

Disconnecting because no response was received for the Tester Present message.

I tried original Ross tech device and one other usb device... nothing worked.

Whre is my Problem?

I attached the log perhaps it helps you.

Thank you!

Dominik
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763


« Reply #1 on: August 24, 2013, 04:14:54 PM »

This happened to me the other night. I just closed Nefmoto, unplugged and replugged in the obd to usb dongle. I waited to make sure I heard and saw that the computer recognized the usb was plugged in and reopened nef then went on as usual.
« Last Edit: August 24, 2013, 04:17:34 PM by userpike » Logged
howtotman
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: August 25, 2013, 05:24:44 AM »

Hi,

tried it many times.. nothing.
Tried ohter pc other drivers usw.

Any ohter ideas?


Best regards

Dominik
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: August 25, 2013, 10:56:44 AM »

Hi,

I'm absolut new in this stuff. My english is not the best please be permissive :-)

I tried to read the ECU from my 1998 S4 B5 with NefMoto ME7 ECU Flasher.
It conects but after 5 seconds the conection breaks up with:

Disconnecting because no response was received for the Tester Present message.

I tried original Ross tech device and one other usb device... nothing worked.

Whre is my Problem?

I attached the log perhaps it helps you.

Thank you!

Dominik


You will never be able to flash your 98 in car due to the cluster.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
howtotman
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #4 on: August 25, 2013, 02:34:47 PM »

Hi,

hm ok that means it is only possible on the bench?
Logged
Joksa_
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #5 on: November 28, 2013, 11:59:53 AM »

Hi,

by the way ddillenger, what is the reason why its not possible to flash to 98 from obd? You mention that cluster is the reason, because of noisy k-line?

Joska
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)