Hello from New York City

Pages: 1 [2]

« previous next »

Author

Topic: Hello from New York City (Read 18076 times)

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12256

	Re: Hello from New York City « Reply #15 on: August 27, 2013, 09:59:22 PM »

immo-off files are eeprom files (512 bytes), not flashes (ECU flashes are 512k or 1Mbyte)

you do not want to write them with nefmoto.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Mistashotta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Hello from New York City « Reply #16 on: August 28, 2013, 05:52:08 AM »

What software is best for eeprom flashing


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Hello from New York City « Reply #17 on: August 28, 2013, 08:24:03 AM »

Read the "Understanding/retrofitting Immobilizer" sticky in the cluster section.

There are literally 5 or 6 tools all uploaded to this site that will turn it off.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Mistashotta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Hello from New York City « Reply #18 on: September 04, 2013, 08:04:17 PM »

I want to say a big THANKS to ddillenger for his "Understanding/retrofitting Immobilizer" write up and thread especially for the ME 7.1.1 section. I was able to delete my immobilizer from my 2001 a6 ecu with ease. For all you Newbies read that thread completely it will answer all ur questions. However I used a AUDI A4 IMMO3 IMMOBILISER READ WRITE tool I got from eBay which I found easy to use. I use the tool to write the immo off download from ME 7.1.1 section to EEPROM 95040. The tool also make it very easy to calculate immo pin if thats all u want to do. Here is the link to tool if and one want to check it out. http://www.ebay.com/itm/110948642581?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649


	Logged

Mistashotta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Hello from New York City « Reply #19 on: September 13, 2013, 09:58:13 AM »

Ddillenger I have a question. Well first thanks again for ur help with killing my immo. However i keep getting a fault for no communication for tcu. Is there a way i can program/flash the ecu to stop looking for the automatic transmission.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Hello from New York City « Reply #20 on: September 13, 2013, 11:00:45 AM »

Flash an M-box file

Then with VCDS change the softcoding to 06711


	Logged

Mistashotta

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Hello from New York City « Reply #21 on: September 25, 2013, 07:59:01 PM »

I tried flashing my ECU with an M-box file. However engine started and shut off. Check and got fault for immo. Now ecu is a me7.1 from a A6. But when I flash it with the file ME7.1.1 OFF.bin the car starts and run. What can I do to prevent the ECU from looking for the TCU.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 17, 2024, 05:29:57 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search