24v 2.8 VR6 ECU in R32?

Pages: [1]

« previous next »

Author

Topic: 24v 2.8 VR6 ECU in R32? (Read 9542 times)

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	24v 2.8 VR6 ECU in R32? « on: September 02, 2013, 12:15:46 PM »

i have an R32 with a bad ECU and i was wondering if anyone has tried to use the 2.8 24V VR6 ECU in an R32? the 2.8 VR6 ECU ecu part number is 022906032CS and the R32 ECU part number is 022906032EG. both are ME7.1.1, the actual hardware on the engines is identical. the only real difference i see is the displacement, one being 2.8 and the other 3.2. only thing i could see being different ECU wise is the state of tune being more aggressive for the R32 and the ECU's coding being different. anyone have any input on this because i'd hate to jsut go out on a limb and waste money on a 2.8 ECU for nothing.


	Logged

kls

Full Member

Karma: +12/-0
Offline

Offline

Posts: 97

	Re: 24v 2.8 VR6 ECU in R32? « Reply #1 on: September 02, 2013, 04:06:05 PM »

The engine will run, poorly. Your AC also won't work. Running the software in the ECU is just a bad idea, best would be to have it reflashed with proper R32 firmware.


	Logged

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: 24v 2.8 VR6 ECU in R32? « Reply #2 on: September 02, 2013, 09:28:43 PM »

i figured there would be a catch. im capable of flashing the R32 file over the stock 2.8 file. R32 ECU is tough to find at a good price but i can get the 2.8 ECU's cheap and their a good bit of them around me.


	Logged

kls

Full Member

Karma: +12/-0
Offline

Offline

Posts: 97

	Re: 24v 2.8 VR6 ECU in R32? « Reply #3 on: September 08, 2013, 12:32:03 AM »

Can you still read the eeprom from your original ECU? If you can then write the eeprom and R32 flash to the 2.8 ecu, if both files are good and write properly you will be good to go.


	Logged

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: 24v 2.8 VR6 ECU in R32? « Reply #4 on: September 26, 2013, 07:32:00 PM »

it worked! i used a 2.8 24V ecu and flashed the stock R32 file to it. car actually ran with the 2.8 file in it as well.


	Logged

Carsinc

Sr. Member

Karma: +17/-2
Offline

Offline

Posts: 447

	Re: 24v 2.8 VR6 ECU in R32? « Reply #5 on: September 27, 2013, 09:23:19 PM »

I sure you know this, The 2.8 has 1 front and 1 rear o2sensor, vs the r32 having 2 front and 2 rear.
The r32 also has a different maf and thottle body which I'm sure changes things alongs with the r32 having bigger injectors.
But if you put both the tune and the eeprom I sure your good to go.
So now the ? is in the motor still in a r32? cause I got other ???s/thoughts if not.


	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: 24v 2.8 VR6 ECU in R32? « Reply #6 on: September 28, 2013, 05:12:38 AM »

question for vwnut: what part number 2.8 ECU have you used?


	Logged

I have no logs because I have a boost gauge (makes things easier)

vwnut8392

Sr. Member

Karma: +19/-7
Offline

Offline

Posts: 271

	Re: 24v 2.8 VR6 ECU in R32? « Reply #7 on: December 04, 2013, 03:54:52 PM »

i think it was 022 906 032 CS.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 09:40:54 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search