Pages: [1]
Author Topic: s4 mbox tune with a bosch maf  (Read 7809 times)
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« on: March 16, 2011, 12:03:12 PM »

I'm gonna use an m tune with a Bosch maf table for a 2000 s4.
If u think this is a bad idea please let me know.
Logged

I have a b5 s4
but i just want to dance.
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #1 on: March 16, 2011, 05:01:52 PM »

My K04'd car uses a Bosch MAF with M box.
Logged
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #2 on: March 16, 2011, 05:24:55 PM »

Thanks Rick, that's what I wanted to hear.
Logged

I have a b5 s4
but i just want to dance.
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #3 on: March 18, 2011, 11:24:02 AM »

the abox xdf. i found shows only 256 points on the bosch maf. is this correct, or is half of the map being cut off?
the hitatchi has 512.
i will try looking at the memory location in hex and see if i can tell... i don't really know what i'm doing in in hex though.
Logged

I have a b5 s4
but i just want to dance.
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #4 on: March 18, 2011, 11:31:03 AM »

nevermind
I found this
http://www.nefariousmotorsports.com/forum/index.php?topic=262.0title=

thanks rick. you're not even online and you still manage to answer my questions lol.
Logged

I have a b5 s4
but i just want to dance.
Twiki
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 42


« Reply #5 on: March 20, 2011, 02:11:15 PM »

Hi Guys,

I'm new to this and have read a lot of these pages but something about the Bosch vs Hitachi MAF doesn't quite make sense to me - there are a number of gaps in my understanding of this. I have a T-box that I want to hook up with an RS4 (Bosch) MAF. Assuming I can flash the M-box bin onto the T-box (can be done right?), what else would I need to do to make the RS4 MAF (83mm I believe?) to work?

Thanks
Logged
judeisnotobscure
Sr. Member
****

Karma: +38/-10
Offline Offline

Posts: 379


« Reply #6 on: March 20, 2011, 03:06:25 PM »

twiki,  you will want to pull the maps of an rs4 ecu, or pull them from a c or a box then correct for larger maf diameter.
mlhfm- linearization of maf voltage
kfkhfm- maf correction table
and scalar mlofs set to 200 for a bosch maf on mbox.
Logged

I have a b5 s4
but i just want to dance.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)