Hi guys, I'm new in this amazing scene and I need some guidance..
My car is a Jetta 1.8t AWW

The past Week-end I make some cleanup on my Engine bay. Remove the SAI, N80, N249 and LDP. the Usual "evap Delete".
But instead of putting some resistors on the harness I was trying to seek for an cleaner option

My ECU is the 06A906032DL SW 360227. I've found a definition file on the site but the XDF didn't contain what I was looking for.

But this guy posted that info

I've edited the XDF, set what I want to delete to 0 and flash my ECU...

Unfortunately two code still here
17834 and 17695

(also 17931 but it's an other story)

can anyone tell me if I missed something ?
my BIN is attached if someone could double check it, that would be great

sh0ck

which xdf are you using?  The one i have for 032DR matches up and its very complete.  I haven't checked for the evap stuff yet.  Wiki says the following... are these in your XDF?

CDTES - Eurobyte - LDP Diagnosis
CDLDP - Eurobyte - EVAP diagnosis
CLATEVE - EVAP plug
CLALDPE - LDP plug

@OldcarGuy85 I use this one http://nefariousmotorsports.com/forum/index.php?topic=3914.
I added CDTES, CDLDP, CLATEVE, CLALDPE manually based on the printscreen shared by AmIdYfReAk.

@ddillenger Yeah I read some interesting thing last night about the ESKONF... Should I leave CLAXXX alone and edit the ESKONF to disable my things?
right now with the N249 connected on the harness my CEL stay off and i don't hit limp mode... I have fixed the CLATEVE yesterday... error on my edited XDF


I'll try with the ESKONF wit this coding AA FF 00 33 FF FB FC