Beginning to think there is some big secret about this ECU lol. Posted on multiple forums to no avail :-(

That's exactly what I want to do.
Firstly when I remove the no read on tuned file and then open in OLS I get some warning about ECU may be bad and then I correct the 1 incorrect checksum. I expect to correct the checksum as I have changed the file by overwriting with f's. But still not sure about bad ECU but everything checksums fine and get 71 which is correct. Ori obd read does not have this problem.

But let's ignore this as I'm injecting calibration data into BDM anyway.

So at the moment that's exactly what I'm doing, copying changes from tuned obd to ori obd. But there are some differences that do not look like map data in 2D but then again they could be switches. More likely to be checksums or maybe programming data. But without the damos I do not know one way or the other, I'm just concerned that I may be replacing data in the file that is not calibration data.

Is the error about the virtual eeprom?

hi,

So the error reads "Not all of the expected blocks were found. Maybe the ECU won't work."

But i have done a comparison between the two files and i cannot see any data areas where there is data missing between the 2.

Any chance you can post the complete will with code and calibrations?  I'm interested to decompile it.

Yes please!

I'm interested in expanding my Volvo logger to Ford.

Haha, another reason is to try an understand the DECOS fuel system, it appears to be the same in the later Volvo's as Ford ME9   No FR for that.