Hi Guys,
   I am wondering if anyone knows what kind of tune will work with Tial 605's? I know they can't be run on the stock programming as you'll run lean but I am wondering if anyone knows if they will work on a stage 3 tune, specifically Tony's stage 3 tune ?) I cant afford to drop $5k on the EPL kit with MAF, injectors, and what not as I still need a lot of the basics like catback, trans mounts, and some other stuff needed when replacing an engine, not to mention labor! (I know, I know. I dont have the shop space, tools, or experience with this car )

Its my daily driver so I mostly just need it to be functional until I can afford all the go fast schwiz.
 Thank you!

You could use that tune except for the PID/Boost table which you should probably zero out otherwise you're risking severe overboost. I believe that 605s come with 16psi preloaded wastegates so without any boost control you'd be making a hair over 16psi.

Once you get that going, you can start tuning the boost tables until you arrive to a desired boost profile.

With the whole nefmoto movement paying for tune becomes a waste of money.

I think if you zero out Kfldimx and the n75 linearization map ( I don't remember the map name off the top of my head)... you could probably zero one or the other but I haven't tested it yet.  You will probably throw a negative deviation code though, you should scale back ldrxn as well,  something like 210 should work fine.

edit*
the boost linearization map is kfldrl