NefMoto > Technical > Data Logging > O2 voltage discrepancy between ME7L and VCDS/ECUx
Pages: 1 [2]
« previous next »
Author Topic: O2 voltage discrepancy between ME7L and VCDS/ECUx  (Read 16358 times)
FlyboyS4
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 215


WWW
« Reply #15 on: April 20, 2014, 06:24:49 PM »
Quote from: phila_dot on April 20, 2014, 04:38:42 PM
What scaling did you use in the ME7L ecu file on that run?

I have no idea.  If you can tell me where/how to check I'll try and get the info for you.
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763
« Reply #16 on: April 20, 2014, 11:33:44 PM »
Quote from: phila_dot on April 20, 2014, 04:43:56 PM
uulsuv_w is raw voltage straight from the ADC with a range of 0-5v.

What's wrong with lamsoni_w for actual lambda? You won't get a better conversion than the OEM logic.


I just checked out lamsoni_w in the FR. I see why uulsuv_w shouldn't be worried about for the most part.


Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923
« Reply #17 on: April 21, 2014, 08:41:17 AM »
ME7 logger voltage is spot on, I verified with voltmeter in parallel when investigating Spartan issues. Measured at infinity rich, stoich and infinity lean. ECU and voltmeter readings were thus indistinguishable at 0V, ~2.05V and 5V.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #18 on: April 21, 2014, 10:22:12 AM »
Quote from: julex on April 21, 2014, 08:41:17 AM
ME7 logger voltage is spot on, I verified with voltmeter in parallel when investigating Spartan issues. Measured at infinity rich, stoich and infinity lean. ECU and voltmeter readings were thus indistinguishable at 0V, ~2.05V and 5V.

So VCDS is wrong?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #19 on: April 21, 2014, 10:54:33 AM »
Quote from: julex on April 21, 2014, 08:41:17 AM
ME7 logger voltage is spot on, I verified with voltmeter in parallel when investigating Spartan issues. Measured at infinity rich, stoich and infinity lean. ECU and voltmeter readings were thus indistinguishable at 0V, ~2.05V and 5V.

This thread is debating the proper scaling factor for 0-1v narrowband voltage usvk and ushk.
Logged
julex
Hero Member
*****

Karma: +79/-4
Offline Offline

Posts: 923
« Reply #20 on: April 22, 2014, 07:11:01 AM »
Quote from: phila_dot on April 21, 2014, 10:54:33 AM
This thread is debating the proper scaling factor for 0-1v narrowband voltage usvk and ushk.

Gotcha.

Easy way to check is to start the car, run it for couple of minutes logging the voltages and then average all the cells and see what they say. If it is anything but 0.5v then the conversion is wrong.
Logged
Pages: 1 [2]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 10:34:14 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.043 seconds with 17 queries. (Pretty URLs adds 0s, 0q)