Pages: [1]
Author Topic: epc light what is it?  (Read 4955 times)
ratherb1
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 115



« on: April 04, 2014, 03:32:36 AM »

i had this problem the other day and i did a wot pull and the epc light flashed really quick .......car felt like it lost power , i got home scanned for codes (vcds) ...nothing ,nada ......ive breezed through a couple threads but why am i not getting codes ? why did this light flash? tia

car is 01 a6 tip 2.7 stock
Logged

-ROMIE
stuklr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 147


« Reply #1 on: April 04, 2014, 03:57:00 AM »

EPC is for the electronic throttle. You should check to see that it moves freely and is clean.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #2 on: April 04, 2014, 10:14:18 AM »

Misfires. Log with VCDS
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ratherb1
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 115



« Reply #3 on: April 04, 2014, 03:52:09 PM »

Misfires. Log with VCDS

it wouldnt store codes? i though a flashing cel would be misfires .......ive never gotten a misfire code, ill do a pull and log misfires with vcds though and see what i get
Logged

-ROMIE
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #4 on: April 04, 2014, 03:55:29 PM »

No. There is a threshold of misfires that has to be met before a DTC is set.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ratherb1
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 115



« Reply #5 on: April 05, 2014, 03:19:42 AM »

okay thanks nye ill check it out
Logged

-ROMIE
ratherb1
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 115



« Reply #6 on: April 06, 2014, 03:53:49 AM »

so i tried to log misfires with vcds and most of the time it said " disabled" so couldnt confirm misfires ......why? it was wierd sometimes itd say enabled but not while i was stepping on it...... Huh  Huh Huh Huh Huh Huh Huh
Logged

-ROMIE
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)