Pages: [1] 2
Author Topic: ECU pin outs for 2001 Audi S4 6-speed  (Read 79499 times)
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« on: September 29, 2009, 12:27:53 PM »

This is the ECU pin out for a 2001 Audi S4 6-speed that I compiled from a few different technical resources.

The text file contains the names and colours of all of the connections to the ecu.
The image is a layout for the ecu pin numbering.

UPDATE: Please download the PDF file in the following post.
« Last Edit: April 30, 2013, 07:59:29 PM by nyet » Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #1 on: October 08, 2009, 10:13:04 AM »


Here is nice all in one PDF version that FallOut compiled from the information I posted in the previous post.

It is a little nicer to look at.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
iznogoud
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 104

Learning junkie


« Reply #2 on: November 13, 2010, 04:07:00 PM »

I have found some errors on the pinouts of this PDF (this past week). On two 2001.5 S4s I double-checked that pin 105 does not go to N249. That pin is empty -- with no wire behind it -- I found after taking apart the harness at the socket. I found a closed circuit with pin 1 of the N249 socket to a wire that on this PDF is listed as going to either N8 or N80 (I cannot remember which).

The other pin (pin 2) of the N249 socket goes to one of the corner pins to the sockets that plug to the fuses supply sockets, right behind the ECU. I believe those corner sockets on most of those pins are power from a particular fuse (not sure which) since they all connect to each other and to various solenoids, like the N249, including cam position sensors. I found that "left-most pins" (so pin 2 on 2-pin sockets, pin 3 on 3-pin sockets, etc) typically connect to power and they are green or green-yellow wires.

Double-check before using this information, but the pinout here most definitely has errors.
« Last Edit: November 13, 2010, 04:11:10 PM by iznogoud » Logged

Audi S4 B5 2000 6sp Cactus Green
Audi A4 B6 Avant 1.8T 2001.5 5sp Santorin Blue
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: November 15, 2010, 05:33:34 PM »


Here is nice all in one PDF version that FallOut compiled from the information I posted in the previous post.

It is a little nicer to look at.

Do you have a .cvs i can import into s4wiki? Smiley
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
madwolf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: March 01, 2011, 01:38:33 PM »

Tony,

I know you've built a benchtop harness for this thing. Do you have any part numbers for connectors.. or if you pulled them from a junkyard, could you share any numbers on them?
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #5 on: March 03, 2011, 01:31:22 PM »

I know you've built a benchtop harness for this thing. Do you have any part numbers for connectors.. or if you pulled them from a junkyard, could you share any numbers on them?

I got my connectors from cars that were being parted out online.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #6 on: March 13, 2011, 06:02:59 PM »

Here is my original document that the PDF was generated from.

It includes lots of info on ECU pins and connections between chips on the ECU circuit board.

I did all of the circuit board tracing back in 2006 when I was figuring out what I/O ports were connected to the injectors, spark plugs, and other sensors, etc.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
AudiA4_20T
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 18


« Reply #7 on: April 26, 2011, 10:58:38 AM »

Tony, I appreciate the knowledge you shared. Do you possibly have any pin readouts for the body harness plugs?
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #8 on: April 26, 2011, 01:06:45 PM »

Tony, I appreciate the knowledge you shared. Do you possibly have any pin readouts for the body harness plugs?

For that you would need to consult the wiring diagrams. They are posted in the forum I believe, but may only be for the A4.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #9 on: April 30, 2013, 07:59:11 PM »

Wiring diagram.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #10 on: April 30, 2013, 08:01:50 PM »

Full set
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
hello
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 64



« Reply #11 on: March 20, 2014, 01:12:04 AM »

Thanks Nyet, I don't mean to bump an old thread but I really needed this for my w/m install. Should be easier now figuring out which wire to splice into. Now to figure out how to tune for w/m should be fun  Wink
Logged
A6_C5_Allroad
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 112


« Reply #12 on: April 01, 2014, 05:21:09 PM »

Thanks Nyet, I don't mean to bump an old thread but I really needed this for my w/m install. Should be easier now figuring out which wire to splice into. Now to figure out how to tune for w/m should be fun  Wink

I'm with you on this!  There is a senior member here (I believe Julex) that is going to be using the Fuel Injector Duty Cycle to modulate his W/M injection.   Currently, I am using boost PSI Coolingmist Vari-Cool 2 has a boost supply hose that allows for direct routing of boost pressure into the variable controller.  I was usin MAP voltage, but didn't like the crazy and constant change.    I like Julex's idea and it has been confirmed that using the injector duty cycle will be suitable signal supply.  It's worth a try.
Logged
Tariq Jallad
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #13 on: July 14, 2014, 11:02:57 AM »



The ECU pin listing and pin diagram was exactly what I was looking for while trying to troubleshoot my N249. Thank you for that Tony, I am glad to run into this forum which I just joined.
Question: According to Bently's repair manual and according to your ECU pin list, ECU pin #105 is for N249 connection to the ECU, when I checked my ECU's harness there is no wire in pin #105, that explains why there was no continuity between the N249 plug wire #2 and the ECU pin #105. It looked to me like this is how it is from the factory. Did Audi forget a wire? Has any one run into a similar issue? My S4 is a 2001 6-speed USA market. Please help to clarify this confusion.
« Last Edit: July 14, 2014, 11:06:19 AM by Tariq Jallad » Logged
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« Reply #14 on: November 18, 2014, 10:21:51 AM »

Can someone name the ECU pin numbers for the ignition signal of cyl 1-6? Can only find non specific 'power output stage', but not which is what.
They should be
Cyl 1-3
94
110
102
Cyl 4-6
95
11
103

But not sure which pin to what cylinder

Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)