base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act.

Pages: 1 [2]

« previous next »

Author

Topic: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. (Read 15502 times)

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #15 on: April 30, 2014, 03:20:13 PM »

Your turbos are going to require around 70 percent DC to hit 20psi at 3500rpm. Take a look at the nefmoto base file, DIMX.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

BraxS4

Full Member

Karma: +2/-6
Offline

Offline

Posts: 162

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #16 on: April 30, 2014, 03:24:58 PM »

thank you daz for the info and bare'n with me.... so dont start with a plain mbox base bin? start with a stage 3 base bin? i had no clue there was such a thing... ill search for base files as we speak.. i guess my initial file F up was starting with a PJ ko3 mbox ecu bin....


	Logged

stage 3 b5 S4

savages4

Sr. Member

Karma: +10/-5
Offline

Offline

Posts: 251

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #17 on: April 30, 2014, 03:33:08 PM »

Brax, delete the bin you posted up so that doesn't get sent around the world. And hit me up on google talk for help, thanks.


	Logged

BraxS4

Full Member

Karma: +2/-6
Offline

Offline

Posts: 162

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #18 on: April 30, 2014, 03:37:13 PM »

i deleted the bin immediately after the first reply.. the first post in this thread was a completely stock mbox i was solo working on that i had all F'd up, thanks ill pm you for the best advice and route to go.. its much easier when someone says yes you need to start with this certain base file. ive been over the wiki and over and over and over, i have learned a lot but am far from understanding every param etc...


	Logged

stage 3 b5 S4

BraxS4

Full Member

Karma: +2/-6
Offline

Offline

Posts: 162

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #19 on: April 30, 2014, 03:45:17 PM »

pm sent on gmail


	Logged

stage 3 b5 S4

catbed

Sr. Member

Karma: +8/-2
Offline

Offline

Posts: 300

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #20 on: April 30, 2014, 05:07:10 PM »

FWIW, with CWMDAPP = 8 you altering PID tables will not affect anything as WGDC is set via KFLDRAPP. I told you to do this to sort out fueling, which you should do before you go about increasing boost.


	Logged

BraxS4

Full Member

Karma: +2/-6
Offline

Offline

Posts: 162

	Re: base file ev14 550, pj rs6 turbos 90mm maf,updated log weird pid req/act. « Reply #21 on: May 01, 2014, 03:15:26 PM »

i just yesterday altered a base bin "tonys" which is what i originally set out to do but was told to start from a fresh stock bin "nightmare", anyways the car ran decent for a first log, 3.90 fats i believe cf below 6... i have a wide band and am keeping a eye on fuel.. thanks for the info, i appreciate every little tip and help... i know you guys have enough stuff going on already!


	Logged

stage 3 b5 S4

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 09:13:35 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search