Pages: [1]
Author Topic: About to try this-Can I use Nefmoto on my 05 Cayenne 4.5 L turbo? what settings?  (Read 8050 times)
treepog
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Hello to all,

I have latest Nefmoto installed on my laptop with driver. I have connected my cable and confirmed it can use premium features.... My Cayenne has a brand new battery installed and I believe it has ME7.1.1 But before I connect this to my SUV I just want to be sure if it will work and if there is any other tips or suggestions before I try this.

I am just wondering if I can use Nefmoto to read and make a copy/backup of my stock/original factory tune on my Cayenne. Then afterwards use Nefmoto to flash a new modded tune (that I will be purchasing) to it?

Also, I have read through most of the Wiki but I am still not sure exactly what settings I need to have on Nefmoto for my particular car?

Thank you Very Much in advance! And sorry if this is a silly question.
« Last Edit: April 26, 2014, 09:12:28 PM by treepog » Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640



Nefmoto will not work with your Porsche I'm afraid. Best bet, pull the ecu and bootmode it, or get an MPPS cable off ebay for 13 bucks.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
treepog
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Thanks soo much for the reply. I was very excited to try this tomorrow in morning...guess not Sad

Oh well...with MPPS cable will I be able to read and write through OBD port in car (without boot mode) or do I still have to remove the ECU from the car?

I also have a Galletto 1260 cable as well...would this work or??

Thank you again!!
« Last Edit: April 26, 2014, 10:52:21 PM by treepog » Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW

There is a English version of galleto and a hack to make any ftdi cable work with it by changing a serial number.  With that you can read and write your ecu in boot mode.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
treepog
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Thanks for the reply...so I can use Galletto cable or MPPS cable with my ecu but I must use boot mode with both of them? Neither will do it without using bootmode?

Is there an advantage to using Galletto or MPPS? Which one is better or are they both the same basically?

Thanks!
Logged
Snow Trooper
Hero Member
*****

Karma: +90/-24
Offline Offline

Posts: 689


WWW

You can use the hacked version with any cable, even a Ross tech one.
Logged

cartoons?
6A 61 72 65 64 40 76 6C 6D 73 70 65 63
treepog
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Thanks again for the reply.

I guess what I'm wondering is if I can only do this in boot mode? There is no way to just do straight OBD (without boot mode). With MPPS I will still need to use boot mode?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640



MPPS will work via OBD.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
treepog
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8



Thank You soo much for all replies. I have an MPPS on the way.

Thanks again

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)