TijnCU
Hero Member
Karma: +60/-4
 Offline
Posts: 690
flying brick
|
 |
« Reply #90 on: January 09, 2018, 04:56:03 AM »
|
|
|
I wrote a switched NOLRA function once, embedded in a 3 set mapswitch file, but it is really a lot of work that can be shortcut by just flashing the ecu. I mean, it takes 2 minutes? Other than that, NOLRA is a value in flash and without custom coding not possible to alter on the fly. The closest you will get is with VCDS basic settings for LR, but you will have to keep the pc with VCDS connected.
|
|
|
|
|
Logged
|
|
|
|
|
tao13
|
|
« Reply #91 on: March 13, 2018, 01:42:22 PM »
|
|
|
Hi all
I want to fix my fkkvs because i have ltft between -12 -> -3 and stft between -8 -> +6
I have a 1.8t auq with big intercooler and 386cc injectors from audi tt bam engine (software is modified for them with all audi maps and values).
I have some question because i don't understand well , so after make nolra = 7
1.must make all fkkvs value to 1 or not before make logs?
2.how much must i drive (in minutes) for log will be ok?
3.can make the log (one log) in all gears or i must make log for every gear and idle too
4.must run at constant speed al a normal drive in a city with stop and go?
Many thanks
|
|
|
|
|
Logged
|
|
|
|
|
KasperH
|
|
« Reply #92 on: March 13, 2018, 02:06:53 PM »
|
|
|
1. Not necessarily. You could also start with your stock/modified FKKVS, just remember to input you current FKKVS into the tool
2. The longer the better. But 30 min. Seems to work good. (For me at least.)
3. Just start the log when engine is warm and just cruise around town.
4. Just try and get as many different pulsewidths in as many different engine speeds as you can.
|
|
|
|
|
Logged
|
|
|
|
6L20vt
Full Member
Karma: +2/-0
Offline
Posts: 152
|
|
« Reply #93 on: March 13, 2018, 02:07:39 PM »
|
|
|
hello, first you must be sure that your krkte and tuvb is the right one, the black injectors do not carry the same values as the blue ones. then I as the best result I have obtained is starting from the whole fkkvs to 1. I made a log of about 100km trying to get all kinds of situations, and keep in each rpm range as long as possible. You can help with the cruise control. use at least 20 samples per second. after this log it loads the information in the tool, and the map should come quite close to what is acceptable. if you want to tune more, you can make shorter log but trying to use all the ranges and in several throttle positions. it's about looking at it and once you get that the tool does not correct just, you should have the adaptations close to 0. I use 50% smoothing and 3 passes. I have always used this configuration.
|
|
|
|
|
Logged
|
|
|
|
|
tao13
|
|
« Reply #94 on: March 13, 2018, 10:21:56 PM »
|
|
|
Many thanks for yout answers.
|
|
|
|
|
Logged
|
|
|
|
up50lut3
Full Member
Karma: +1/-0
Offline
Posts: 55
|
|
« Reply #95 on: May 20, 2018, 06:19:26 PM »
|
|
|
i kep getting error " index was outside of the bounds of array"
i know its due to my fkkvs file just dunno whats wrong
help? thanks
|
|
|
|
|
Logged
|
|
|
|
TijnCU
Hero Member
Karma: +60/-4
Offline
Posts: 690
flying brick
|
|
« Reply #96 on: June 14, 2018, 03:23:51 AM »
|
|
|
i kep getting error " index was outside of the bounds of array"
i know its due to my fkkvs file just dunno whats wrong
help? thanks
Your rpm axis is not good. You probably hit enter  try this one. |
|
|
|
« Last Edit: June 14, 2018, 03:25:48 AM by TijnCU »
|
Logged
|
|
|
|
PaulB
Newbie
Karma: +1/-0
Offline
Posts: 17
|
|
« Reply #97 on: September 18, 2018, 09:31:37 AM »
|
|
|
Hello! I get this msg error... Those are the data.. Something is wrong...  |
|
|
|
|
Logged
|
|
|
|
guitar24t
Full Member
Karma: +13/-0
Offline
Posts: 101
|
|
« Reply #98 on: September 25, 2018, 03:08:28 PM »
|
|
|
Hello! I get this msg error... Those are the data.. Something is wrong... I believe your input CSV or log file is not in the correct format. Please check the sample files. |
|
|
|
|
Logged
|
|
|
|
|
Jerry Tunin
|
|
« Reply #99 on: October 12, 2018, 12:49:05 AM »
|
|
|
I have been playing around with this a bit and was wondering what exactly the WBAFR correction was? Also what variable do I need to log in order to utilize it if I need to. I have a 1.8T with Wideband sensor...
|
|
|
|
|
Logged
|
|
|
|
guitar24t
Full Member
Karma: +13/-0
Offline
Posts: 101
|
|
« Reply #100 on: October 12, 2018, 08:44:43 AM »
|
|
|
I have been playing around with this a bit and was wondering what exactly the WBAFR correction was? Also what variable do I need to log in order to utilize it if I need to. I have a 1.8T with Wideband sensor...
This is used for correction of Narrowband cars that do not have a built-in wideband sensor, and one was added to the logs. |
|
|
|
|
Logged
|
|
|
|
STEVEPHILP
Full Member
Karma: +2/-0
Offline
Posts: 70
|
|
« Reply #101 on: October 20, 2018, 02:07:24 AM »
|
|
|
Cripes Rob is back!!
|
|
|
|
|
Logged
|
|
|
|
stuartdean
Full Member
Karma: +1/-8
Offline
Posts: 78
|
|
« Reply #102 on: January 20, 2019, 04:03:00 PM »
|
|
|
Hi Thanks,
This is an excellent tool but... it's weird as I downloaded this and it complained that the temp file created if clicking on "before" is neutralised as a virus see Panda attachment?
|
|
|
|
|
Logged
|
|
|
|
BOLT
Jr. Member
Karma: +2/-0
Offline
Posts: 46
|
|
« Reply #103 on: May 27, 2020, 02:07:18 AM »
|
|
|
Hi
I can’t figure out how to make a CSV file from my FKKVS card
I work in WINOLS
|
|
|
|
|
Logged
|
|
|
|
BOLT
Jr. Member
Karma: +2/-0
Offline
Posts: 46
|
|
« Reply #104 on: May 27, 2020, 01:41:51 PM »
|
|
|
it works
|
|
|
|
|
Logged
|
|
|
|
|
