Help with unsteady boost

Pages: [1]

« previous next »

Author

Topic: Help with unsteady boost (Read 5426 times)

hipeka

Full Member

Karma: +1/-1
Offline

Offline

Posts: 85

	Help with unsteady boost « on: June 12, 2014, 01:00:04 PM »

Hi,

I have problems to get steady boost curve. After new version its usually quite steady but after a while its starts to overboost and oscillate after peak boost.
I think its something to do with I-value regulation at boost PID.

Can someone who understand this PID thing take a look at this log file and say what values should i adjust?
Is it just put lower value to LDEIAP, stock value is -30hPa if my map pack is correct.

Car is Audi A4 B5 1.8t Quattro AWT (Euro -version with wideband, 4B0906018CG). Equipped with K03-073 from BEX, BEX exhaus manifold and EV14 550CC injectors.

Here are .csv file WOT run at 3rd gear and my current tuned file.


« Last Edit: June 12, 2014, 01:14:10 PM by hipeka »	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Help with unsteady boost « Reply #1 on: June 12, 2014, 03:16:17 PM »

Are your I limit trims non-zero?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

hipeka

Full Member

Karma: +1/-1
Offline

Offline

Posts: 85

	Re: Help with unsteady boost « Reply #2 on: June 12, 2014, 09:36:23 PM »

Quote from: nyet on June 12, 2014, 03:16:17 PM

Are your I limit trims non-zero?

ldimxa_0 ldimxa_1 ldimxa_2 ldimxa_3 ldimxa_4

6.35 4.1 3.7 3.95 0


	Logged

hipeka

Full Member

Karma: +1/-1
Offline

Offline

Posts: 85

	Re: Help with unsteady boost « Reply #3 on: June 14, 2014, 01:39:12 AM »

I change LDEIAP -30hPa to -200hPa and now I-value trims stay at zero value. It helps a little but still overshooting. I try to get new logs soon.

I think TLDIAPN is on 19ACA on my .bin but RPM scaling looks a bit weird to this application (10084).
I try to compare mine to 8N0906018CB (225TT) map pack.
Is there any other fully defined map pack which would be closer to 4B0906018CG?

How should i adjust TLDIAPN to get I-adaption work correct?


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: Help with unsteady boost « Reply #4 on: June 14, 2014, 03:59:35 AM »

Quote from: hipeka on June 14, 2014, 01:39:12 AM

look at awm def files or mk4


	Logged

Giving your mom a tuneup

hipeka

Full Member

Karma: +1/-1
Offline

Offline

Posts: 85

	Re: Help with unsteady boost « Reply #5 on: June 15, 2014, 01:46:33 PM »

Quote from: Marty on June 14, 2014, 03:59:35 AM

look at awm def files or mk4

I dont have good def file for CH file.


	Logged

hipeka

Full Member

Karma: +1/-1
Offline

Offline

Posts: 85

	Re: Help with unsteady boost « Reply #6 on: June 30, 2014, 07:35:27 AM »

I-limit trims still creeping up even with increased LDEIAP and zeroed TLDIAPN.

That cause overboost when actual meets requested and also boost oscillation.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 01:28:04 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search