Pages: [1]
Author Topic: Memory layouts: For 1024kb file, use 29F800BB. For 512kb file, use 29F400BB.  (Read 26763 times)
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640



If you have a 2001+, use 29F800BB (with the exception of the TT)
If you have a 1999-2000, (with the exception of 2000 S4 and A6) use 29F400BB
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM



what about 29F800 and 29F800BT ?
Logged
4ringpieces
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 232



What should be used for TT?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024




What should be used for TT?

I believe narrowband use 400 BB, and wideband 800BB.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW

Should really start compiling a db

would be nice to add it to Nef flasher :/
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640



Should really start compiling a db

would be nice to add it to Nef flasher :/

Don't worry about the BT layout, it's never used from the factory.

As for the 29F800 without a suffix, that will work just fine, consider it to be generic.

If in doubt as to what to use, open the ecu. The flash will say which layout it uses!
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Ballistix234
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 11




Nice! thank you I was having an issue with this.   Grin
Logged

Scratch that! Ultra Newb!
zydecelt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


TUNERTT on Track



My ride is a 2003 Mk1 TT 225
I am able to connect and open the ECU using Vag Com.
When I try to do a full read I get a fail using any/all of the memory layout files, 400BB, 800BB don't work.
Here is the full ECU Info:
0x94:
Hardware No.
0261207774
Software No.
1037367515

0x91 Manuf. ECU Hardware no.:
0x98, 0xFF

0x9B Calibration Date:
8N0906018BB, 0005, 0x00001E1E, 0x00000000, 0x0A45, 1.8L R4/5VT, G01

Is the proper memory layout file 0906018BB? This looks similar to the names of the available files.
Is there a member who has/can share the proper layout file with me?
Sorry if this is not an appropriate forum for this question.
If so please direct me to the best forum.
Logged
zydecelt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


TUNERTT on Track



One other detail about my TT Ecu full read failure:
I am currently running Revo Stage 3 Tuning.
I have seen where there are programs that can add some code to the bin file that prevents uploading existing file from ecu.
Could that be what Revo does and that is why I can't do a full read?
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177



Usually Revo block writes, not reads, I'm sure.  Why you'd want to read Revo stuff though, I don't know.  Either run it, or don't.  Don't go tweaking it, it's encrypted, everything's moved around.

If you can pull the file and edit it with encryption, you don't need the Revo file in the first place.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #10 on: September 23, 2015, 07:00:50 AM »

Usually Revo block writes, not reads, I'm sure.

Other way around?
Logged
zydecelt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


TUNERTT on Track


« Reply #11 on: September 23, 2015, 08:07:17 AM »

Thanks for the response, I am not surprised that the Revo tune is encripted and read-protected.
I don't want to edit the Revo tune, just archive it.
I have the stock tuning file and will work with that but I wanted to do my flashing in the car and be able to reload the existing file as needed.
I'll just find a stock ECU and work with that, I was just hoping not to have to swap ECUs back and forth, its not that easy to get to.
The Revo tune is OK but I am running a stroker bottom end so I am displacing 2.0 L not 1.8 L and running a GT2871R turbo not a K04 and the Revo tune is not getting all there is to get. Revo tune plus manual boost control yields dyno result of 260 ft/lb@ 3800 and 252 whp @ 5100, I think it should be capable of +300 whp.
The never ending quest for MORE POWER!
Now to find that stock ECU...

Regards,
Zydecelt
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #12 on: September 23, 2015, 11:14:34 AM »

You can read the flash via boot mode.  Save off the flash and eeprom and write back in bootmode if you want to restore your ecu.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)