Pages: [1]
Author Topic: Motronic ME17.9  (Read 1701 times)
Dynodn
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: August 05, 2014, 03:23:38 PM »

I have been doing a lot of reading and suing here.
It has been so much info. My hats off to all you guys
who dilligently figure out all of this reflashing process.


I have a Motronic ME17.9.74 Will the Nefmoto
work on this ECU? And the Protuner or will I need
something else. Im not afraid to put in the research
and the effort to learn. But I want to ask the pros in this field.
Since you guys really know whats going on.
But don't want to go down a dead end road.

Thanks



Logged
Dynodn
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #1 on: August 05, 2014, 06:33:16 PM »

I should have put  a little info in on me I guess.
I guess you could call me a newbie because of me
only having one post.

 I own a shop that has and engine dyno and chassi dyno, 8 CNC
machines a 5 axis machine for CNC head porting. We also make camshafts,
and gear manufacturing, Exhaust systems, as well as complete billet 2 cylinder engines.
 

Im not new to motor or ECU tuning.
I have been using a Magnet Morelli ECU for some OEM tuning for complete adjustably
on the engine Dyno. Now I need to do some OEM reflashing and was hoping
to get some direction in your field of expertise.
 

After reading forums upon forums this seem
like the best place to start for some answers. 
Thanks in advance.

Logged
TCSTigersClaw
Sr. Member
****

Karma: +13/-5
Offline Offline

Posts: 352



« Reply #2 on: August 07, 2014, 12:45:45 AM »

Nefmoto is for certain ME7. ecus.......

Read the newly how-to guide http://nefariousmotorsports.com/forum/index.php?topic=6490.30
Logged

VAG cars newbie tuner Smiley
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)