Pages: [1]
Author Topic: WinOLS / Tunerpro issue's and XDF request  (Read 6560 times)
Allabout
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 54


« on: August 09, 2014, 02:22:01 AM »

Not sure if this is the correct forum topic ot be in,
So If mod's feel it needs to be moved?? Please do so.

Right now, I'm struggling myself to be able to read the HEX correctly.
A few applications where suggested with no luck I'm afraid.

Tuner Pro - Not able to be used, As I don't have an XDF file. I did look in here
http://nefariousmotorsports.com/forum/index.php?board=17.0

I realize I'm still very much a beginner in tuning directly. So I would like to be able to understand all this information more clearly.
If anyone has any suggestions, information or help. That would be appreciated.
Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #1 on: August 09, 2014, 05:46:54 AM »

Your is a 551D right?

You have over here 2 xdf's

http://nefariousmotorsports.com/forum/index.php?topic=430.0

http://nefariousmotorsports.com/forum/index.php?topic=1976.0
Logged
nyet
Administrator
Hero Member
*****

Karma: +605/-168
Offline Offline

Posts: 12243


WWW
« Reply #2 on: August 09, 2014, 10:34:06 AM »

Please make an attempt to learn the forum layout Tongue
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Allabout
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 54


« Reply #3 on: August 09, 2014, 05:21:40 PM »


Thanks, I used the search function and never found any results. Even using Google resulted no info.
So thanks


Please make an attempt to learn the forum layout Tongue

Honestly, I'm trying to.
Was just not sure if the XDF and use of application would fall under tuning as such or not.
Logged
nyet
Administrator
Hero Member
*****

Karma: +605/-168
Offline Offline

Posts: 12243


WWW
« Reply #4 on: August 09, 2014, 05:42:09 PM »

There is no reason to stay with the D box.

Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Allabout
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 54


« Reply #5 on: August 09, 2014, 07:27:35 PM »

There is no reason to stay with the D box.



Thanks,

Then I would need to change the MAF table to associate with the Bosch unit?
Otherwise, I need to replace the MAF with Hitachi unit?

Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #6 on: August 10, 2014, 06:23:42 AM »

You could do both,

you can repalce your maf, or change MLOFS KFKHFM MLHFM to bosch values (MLHFM is bad define in 8D0907551D_2012-09-13.xdf, use 8d0907551D_publish.xdf)
Logged
Allabout
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 54


« Reply #7 on: August 10, 2014, 06:58:33 PM »

You could do both,

you can repalce your maf, or change MLOFS KFKHFM MLHFM to bosch values (MLHFM is bad define in 8D0907551D_2012-09-13.xdf, use 8d0907551D_publish.xdf)

If I'm flashing stock file on of course. However, once I know what the "tuned value's" would become? Only then I feel I would transfer information over.

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)