L-Box and M-Box addresses are the same, you can apply the same changes to a stock L-Box file

I've had the idea to contribute something like this for a while, and have never made time to do it.  Props to everyone contributing and making it happen..

I've also got a new allroad, stock other than catback, that I can possibly help with some logging graphs if I get a minute (and if I am able to do some work and determine that the K03's are still good, otherwise it will go big turbo right away).

BTW, I haven't checked the xdf's myself and am only going off of the screenshots, but if not already, I agree with the previous suggestions that having the real names for the maps in addition to the easier descriptors will help ease the transition for people to go from 'stage 1' into future self-directed research and tuning (and it would help people who already know the map names by knowing what they are actually changing).

ok so i re read all the posted and caught the part about pedal positon for desired afr i changed things around to match that and ive displayed my other changes this will get loaded tonight any feed back before i load and logg?
also* i corrected my logger issue i moved somthing from a folder and it screwed the whole thing up

so i adjusted afr and boost didnt get into timing cause didnt think it was discussed in this thread enough so thats stock .....ran it through me7check (easy check). and found 4 errors . what did i do wrong ? attached bin below......going to log if i can get this sorted....for the tip logs

edit....i guess i need to use me7 sum to fix the errors? uhhhhg this may take awhile i hate command line

There's easy way to run a command line process with minimal typing, just drag and drop files

Open up a command prompt by pressing the windows key, type cmd, press enter.

If you want to use ME7Sum to correct checksums follow these steps:

1) drag the ME7Sum exe over the command prompt window.
2) select the command prompt window and press the spacebar
3) drag your bin file over the command prompt window.
4) select the command prompt window and press the spacebar
5) drag your bin file over the command prompt window again.  Rename that file path parameter in the command prompt if you wish to not overwrite your non-checked file
6) Press enter

If you want to use ME7Sum to validate your file, follow steps 1-3 and 6.
The same would apply to ME7Check, 1-3 and 6, but drag ME7Check in the first step instead of ME7Sum

if i could kiss you i would, hahahaha worked like a charm........


thanks nye for the dusting     i'll get the tip logs soon

i guess i have a boost leak somewhere ill get that figured out......    but here are some tip logs 14 psi for boost and afr figured like talked about in this thread... timing stock  ......im getting massive timing pull
ill get this boost leak figured and post new one ......do you guys think the timing pull is from the boost leak?