Using MMPS to read/write to a Bosch 3.8.3

Pages: [1]

Author

Topic: Using MMPS to read/write to a Bosch 3.8.3 (Read 3926 times)

Mo Arif

Jr. Member

Karma: +0/-1
Offline

Offline

Posts: 29

	Using MMPS to read/write to a Bosch 3.8.3 « on: September 03, 2014, 06:49:22 AM »

Hi all,

am I correct in thinking that you need some form of OBD2 adaptor to use MPPS to flash a Bosch 3.8.3 ECU?


	Logged

technic

Full Member

Karma: +18/-5
Offline

Offline

Posts: 227

	Re: Re: Using MMPS to read/write to a Bosch 3.8.3 « Reply #1 on: September 03, 2014, 07:16:55 AM »

Adaper that pulls OBD pin 13 to +12V, or ecu pin 43 to +12


	Logged

Beaviz

Full Member

Karma: +8/-4
Offline

Offline

Posts: 190

	Re: Using MMPS to read/write to a Bosch 3.8.3 « Reply #2 on: September 03, 2014, 07:17:58 AM »

AFAIK you can not read it. You should be able to write if you supply 12v to pin 43 on the ECU or pin 13 on the OBD port.


	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: Using MMPS to read/write to a Bosch 3.8.3 « Reply #3 on: September 03, 2014, 10:08:32 AM »

exactly reading only with desoldering

but no need.

What is your SW number ? You can find an ori here to modify and flash


	Logged

VAG cars newbie tuner

Pages: [1]

Jump to:

Welcome, Guest. Please login or register.
Did you miss your activation email?