Pages: 1 [2]
Author Topic: 01 s4 2.7 single tubro 2nd-3rd gear log  (Read 17794 times)
emtdiaz
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« Reply #15 on: October 09, 2014, 04:24:28 PM »

Please log wgdc and i-max

Also, why are you requesting so much boost so soon? You're asking for limp... i'd delay peak req load till at least 3k, if not 3.5k
i will go back in and log those as well but im not using the N75. just wastegate spring. where on tuner pro do i go to delay peak request load?
Logged
emtdiaz
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« Reply #16 on: October 09, 2014, 04:43:30 PM »

im using this stage 2 file as a base file to work with. Thank you guys for helping and im ready to do whatever so my car can run right.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #17 on: October 09, 2014, 04:46:23 PM »

i will go back in and log those as well but im not using the N75.
Not really needed then, but IMO you really should be using N75 control

Quote
where on tuner pro do i go to delay peak request load?

http://s4wiki.com/wiki/Tuning#Positive_deviation
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
emtdiaz
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« Reply #18 on: October 09, 2014, 04:58:42 PM »

Not really needed then, but IMO you really should be using N75 control

http://s4wiki.com/wiki/Tuning#Positive_deviation
Thank you for the link. i will read into delaying peak req. i opened it on tuner pro LDRXN_1_A
and not sure what the number mean and how to delay it.

Also, what would be the benefit of using the N75?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #19 on: October 09, 2014, 05:04:24 PM »

Thank you for the link. i will read into delaying peak req. i opened it on tuner pro LDRXN_1_A
and not sure what the number mean and how to delay it.

Uh. By now you should know the relationship between load and boost :/

Quote
Also, what would be the benefit of using the N75?

Sad

Same thing. You really shouldn't be tuning w/o some of this basic knowledge Sad
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)