Pages: 1 ... 6 7 [8]
Author Topic: 1.8t: electronic SUV via N249 output  (Read 145250 times)
krawciox
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 14


« Reply #105 on: September 26, 2024, 10:37:44 AM »

Hi there,
Want to dig out this thread a bit.

Setup:
1.8L transverse engine
with longtitudal engine ECU 8E0 909 518aq
K04-064 turbo from s3 8P with cold side from k03 from AXX 2.0L tfsi engine. eDV built in.

Thing is:

When stationary, reving to arround 3200rpm causes turbo surge noise. Same thing when driving. Only above certain rpms (3200) or? certain boost eDV drops pressure as it should.
Readed whole thread and didn't know how from what i should start testing,  I will try golfputtputt solution and post some results (if i gather some).

Is there anyone who succesfully made fully correct working sollution for this?
Logged
Pages: 1 ... 6 7 [8]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)