Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster

Pages: [1]

« previous next »

Author

Topic: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding (Read 6762 times)

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « on: September 24, 2014, 04:54:00 AM »

Hey Guys,

I have the oil level warning going off everytime I start the car. I previously smashed sump and have refitted sump without sensor because you get more clearance. There are a few audi TT guys doing this. However trying to recode the cluster through VCDS fails even if I have the SKC login code.

I have to change the soft coding from 02744 with 02704 or 02734 to remove this.

I have attached a dump of the bin file I read from the cluster.

Thanks appreciate the help.


	Logged

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Re: Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #1 on: September 25, 2014, 06:55:26 PM »

Anyone have any tips?


	Logged

TCSTigersClaw

Sr. Member

Karma: +15/-6
Offline

Offline

Posts: 353

	Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #2 on: September 25, 2014, 10:56:14 PM »

Recoding cluster fails ?

Are you using Rosstech`s VCDS or a clone ?


	Logged

VAG cars newbie tuner

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Re: Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #3 on: September 25, 2014, 11:20:31 PM »

I can recode the last digit only. Will not allow me to recode to remove oil level sensor warning.

Clone device.

Was thinking if soft coding is in the cluster firmware could change by accessing bin and reprogram to cluster.


	Logged

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Re: Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #4 on: October 02, 2014, 06:56:31 PM »

Any can offer an info to me?


	Logged

ta79pr

Full Member

Karma: +4/-0
Offline

Offline

Posts: 103

	Re: « Reply #5 on: October 05, 2014, 02:30:55 PM »

I had a similar issue temporarily while I was using an oil pan with no sensor hole. I ended up carefully filling the sensor with oil and sealing the sensor with permatex. I kept the sensor between the battery and headlight plugged in. Worked fine for a few thousand miles.


« Last Edit: October 06, 2014, 03:43:30 AM by ta79pr »	Logged

02 TT tdi (BEW)
2005 allroad 2.7tM (BEL)

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Re: Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #6 on: October 08, 2014, 05:59:01 AM »

Do you mean through the little pint size hole at tip of sensor?


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #7 on: October 08, 2014, 07:42:05 AM »

Presumably you could achieve the same effect with a resistor?


	Logged

leventis

Newbie

Karma: +0/-1
Offline

Offline

Posts: 11

	Re: Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #8 on: October 08, 2014, 02:21:29 PM »

I don't think anyone has been successful have read alot of posts. The tried way to recode cluster and filling sensor with oil.


	Logged

ta79pr

Full Member

Karma: +4/-0
Offline

Offline

Posts: 103

	Re: Audi A3 2001 8L - Cluster - Remove Oil Level Warning Cluster - Soft Coding « Reply #9 on: October 08, 2014, 05:38:57 PM »

Image attached. Resistor will not work because it is pwm.


	Logged

02 TT tdi (BEW)
2005 allroad 2.7tM (BEL)

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 11:09:47 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search