What "other" ecus can i use and flash to be an "M box"?

Pages: 1 [2]

« previous next »

Author

Topic: What "other" ecus can i use and flash to be an "M box"? (Read 20461 times)

zadeluca

Newbie

Karma: +0/-0
Offline

Offline

Posts: 8

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #15 on: July 03, 2012, 09:15:50 AM »

nevermind, i found those are M5.9.2 not 7.1

http://controlunits.info/partnumbers/bosch


	Logged

arsrs4

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #16 on: April 27, 2018, 10:20:25 PM »

I have flashed a 2.8 Passat ecu with mbox Notorious VR stage 2+ file(egt and rear o2s coded out) and put it into my 2001.5 S4 with a slight connector modification. The car runs great. However, I believe those ecus dont have esp support, but I still get no lights on the dash for either esp or abs. So, is it safe to assume that its just the firmware that controls whether your car can run esp or not?


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2802

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #17 on: April 28, 2018, 07:12:43 PM »

any apb ecu will cross flash and if you use a/m box it also immo offs the ecu because they where not equipped with immo. so no eeprom flashing required. tho the 2.8 ecu will cross flash i dont reccommend doing so the ecu is missing hardware that the s4 ecu has ive tried this in the past and had no boost control. others may have had better luck why? idk but i dont recommend it


	Logged

Giving your mom a tuneup

arsrs4

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #18 on: May 12, 2018, 04:56:55 AM »

Quote from: Marty on April 28, 2018, 07:12:43 PM

Hello!
What kind of problems do you have with boost control?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #19 on: May 12, 2018, 05:22:40 PM »

Quote from: arsrs4 on May 12, 2018, 04:56:55 AM

Hello!
What kind of problems do you have with boost control?

I believe they do not have N75 pwm drivers.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Lost

Hero Member

Karma: +21/-14
Offline

Offline

Posts: 556

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #20 on: May 13, 2018, 01:05:35 AM »

You can not use non turbo ECUs even if they are Me7.


	Logged

azmotorsport

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: What "other" ecus can i use and flash to be an "M box"? « Reply #21 on: April 29, 2019, 02:31:35 PM »

Hello
I have an ECU of RS4 B5 (8D0907551K) lying around and want to use as emulator ECU (OLS300).
I would like to try the A6 2.7 Biturbo (4B0907551M) soon.
It works?

Thanks and regards
azmotorsport


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 09:25:31 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search