Pages: [1]
Author Topic: Unable to full read flash B6 S4 'G'-box (8E0 910 560 G)  (Read 5464 times)
MOB7D4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« on: September 29, 2014, 11:49:28 AM »

I'm able to connect to the ECU at highest baud rate. After connecting, I lower baud to 38,400. In the KWP2000 Flashing tab, I choose the 29F800BB memory layout to full read flash. This is as far as I've been able to go:

29/Sep/2014 11:46:13.106: USER: Starting to read data block.
29/Sep/2014 11:46:13.110: USER: Requesting upload from ECU for address range 0x00800000 to 0x00803FFF.
29/Sep/2014 11:46:13.113: LOG: Sent message with service ID RequestUpload
29/Sep/2014 11:46:13.139: LOG: Received message with service ID: NegativeResponse
29/Sep/2014 11:46:13.141: LOG: Received negative response for service ID: RequestUpload, with response code: NoProgram
29/Sep/2014 11:46:13.146: USER: Request upload from ECU failed, ECU reports service is not supported. Request upload may have been disabled by aftermarket engine software.
--------------------------------------------------------------------------------------------------------------------------
29/Sep/2014 11:46:13.148: USER: Reading ECU flash memory failed. Trying to force ECU to recognize read operation is complete.
29/Sep/2014 11:46:13.151: LOG: Validating flashed data checksum for address range 0x00900000 to 0x00900001.
29/Sep/2014 11:46:13.156: LOG: Sent message with service ID StartRoutineByLocalIdentifier
29/Sep/2014 11:46:13.178: LOG: Received message with service ID: StartRoutineByLocalIdentifierPositiveResponse
29/Sep/2014 11:46:13.183: LOG: Sent message with service ID RequestRoutineResultsByLocalIdentifier
29/Sep/2014 11:46:13.202: LOG: Received message with service ID: NegativeResponse
29/Sep/2014 11:46:13.204: LOG: Received negative response for service ID: RequestRoutineResultsByLocalIdentifier, with response code: BlockTransferDataChecksumError
29/Sep/2014 11:46:13.207: LOG: Checksum is incorrect.
29/Sep/2014 11:46:13.209: USER: Finished forcing ECU to recognize that failed read operation is complete.
29/Sep/2014 11:46:13.230: USER: Reading ECU flash memory failed.
29/Sep/2014 11:46:15.687: LOG: Sent message with service ID TesterPresent
29/Sep/2014 11:46:15.704: LOG: Received message with service ID: TesterPresentPositiveReponse
29/Sep/2014 11:46:17.388: LOG: User Prompt - Title: Reading ECU Flash Memory Complete Message: Reading ECU flash memory failed. Result: OK
--------------------------------------------------------------------------------------------------------------------------
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: September 29, 2014, 12:38:52 PM »

The B6/B7 S4's don't usually cooperate with nefmoto I'm afraid.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
MOB7D4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #2 on: September 29, 2014, 01:51:24 PM »

any suggestions?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: September 29, 2014, 02:40:00 PM »

Head to audirevolution.net and ask sakimano for more information on how to tune b6/b7

He's super knowledgeable.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
MOB7D4
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #4 on: September 29, 2014, 03:40:05 PM »

 Grin Yeah, right! I've seen your post about the collection of mouth-breathers at AR...doesn't exactly inspire confidence. Couldn't open that site anyway, dead link or something.

So what options do I have? New ecu, store-bought tune, etc...just to stop the bitchin' of the rear O2 sensors?? What a pisser! Angry
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #5 on: September 29, 2014, 03:51:52 PM »

Your only option is MPPS probably
« Last Edit: September 29, 2014, 09:33:30 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #6 on: September 29, 2014, 04:24:34 PM »

You can also bootmode it Smiley
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.037 seconds with 16 queries. (Pretty URLs adds 0s, 0q)