Pages: 1 [2]
Author Topic: Any way to unlock used ecu to work on another car? 05 audi a6  (Read 13734 times)
efrain3282
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #15 on: October 23, 2014, 06:49:40 AM »

Well looks like no matter what, first thing is first and I have to figure out how to get these pins or "skc's" Let me focus on that then I'll hit these boards again. I will still be logged in and open to any suggestions in the meanwhile so leave a comment. Thanks again guys.
Logged
efrain3282
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #16 on: October 23, 2014, 03:44:20 PM »

***UPDATE*** Found a guy about 20 minutes away from me who was somehow able to transplant all the info from one ecu to the other in about 3 hours and it worked like a charm!!! Car started up no problem and no check engine light.  Grin
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #17 on: October 23, 2014, 03:48:22 PM »

***UPDATE*** Found a guy about 20 minutes away from me who was somehow able to transplant all the info from one ecu to the other in about 3 hours and it worked like a charm!!! Car started up no problem and no check engine light.  Grin

Excellent!
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
tpzd3fq
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #18 on: November 11, 2014, 03:20:53 AM »

***UPDATE*** Found a guy about 20 minutes away from me who was somehow able to transplant all the info from one ecu to the other in about 3 hours and it worked like a charm!!! Car started up no problem and no check engine light.  Grin
How did you do that? Desold and Swap the immo chip or something else?
thanks for sharing
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #19 on: November 11, 2014, 08:15:52 AM »

How did you do that? Desold and Swap the immo chip or something else?
thanks for sharing

im going to say he cloned it with bdm.
Logged
efrain3282
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #20 on: November 26, 2014, 09:47:51 AM »

Better late than never, but yes the guy basically cloned the info from one to the other. The main issue on the original ecu was that it was loosing ground.
Logged
terminator
Sr. Member
****

Karma: +15/-4
Offline Offline

Posts: 425


« Reply #21 on: November 26, 2014, 03:04:26 PM »

I think dealer can swap this ECU for 1 minute. At least EDC16 can be swapped, Simos6 is the same generation.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)