r32 no read on bench

Pages: [1]

« previous next »

Author

Topic: r32 no read on bench (Read 6298 times)

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	r32 no read on bench « on: October 30, 2014, 08:09:50 AM »

Hi I have a efh ecu and cannot read it via boot mode I have seen on the net that these ecu's are very hard to bench.Can anyone help me as I don't want to pull the chip.I have connected all cables correctly even the can lines.I have gone hrought he process of pin 24 then 12v hold for 3-5 secs the remove pin24.
It always comes up with error booting ecu,I have tried with m ktag(slave) and my mpps master(original) and still the same any help appreciated sorry if this is an old topic but new to me,

Marc


	Logged

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: r32 no read on bench « Reply #1 on: October 30, 2014, 08:43:44 AM »

only 5 threads down from yours was the right one....

http://nefariousmotorsports.com/forum/index.php?topic=5855.0title=


	Logged

I have no logs because I have a boost gauge (makes things easier)

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	Re: r32 no read on bench « Reply #2 on: October 30, 2014, 11:00:29 AM »

Thankyou for replying,are you saying power pin 121 and it should read the flash

Marc


	Logged

MK2-VRT

Full Member

Karma: +2/-10
Offline

Offline

Posts: 131

	Re: r32 no read on bench « Reply #3 on: October 31, 2014, 04:22:54 AM »

No i dont think so mate..

When you got a BFH MK4 or BUB MK5 ecu, pin 21 = Power, pin 121 is earth trigger for N156 solenoid.

From both ecu's the same..

Be careful..

ME7.1.1


	Logged

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	Re: r32 no read on bench « Reply #4 on: October 31, 2014, 06:05:58 AM »

I have read the topic and it says 12v power to 121 or have I read the topic wrong.This is why I like to check.

Marc


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: r32 no read on bench « Reply #5 on: October 31, 2014, 06:26:05 AM »

That thread is talking about a me7.5 1.8t ecu, not a me7.1.1 R32 ECU. Look at the wiring diagram before you stick power up pin 121.


	Logged

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	Re: r32 no read on bench « Reply #6 on: October 31, 2014, 07:49:27 AM »

Oh Thanks I have looked at the wiring diagram and it is earth for solenoid that is why thought best to check.So I am none the wiser with this ecu in boot mode.Can anyone shed some light on these some one must be boot loading them,I don't want to pull the chip if I can help it all though it would have nbeen done days ago,

Marc


	Logged

turboat

Hero Member

Karma: +45/-3
Offline

Offline

Posts: 619

	Re: r32 no read on bench « Reply #7 on: October 31, 2014, 11:27:46 AM »

http://nefariousmotorsports.com/forum/index.php?topic=5675.0


	Logged

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	Re: r32 no read on bench « Reply #8 on: November 28, 2014, 11:26:02 AM »

Hi I finally got the ecu to read on the bench by removing the 000 resistor but do I have to reinstall the resistor or can it stay out,

MARC


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: r32 no read on bench « Reply #9 on: November 28, 2014, 12:57:58 PM »

Quote from: marcone on November 28, 2014, 11:26:02 AM

Hi I finally got the ecu to read on the bench by removing the 000 resistor but do I have to reinstall the resistor or can it stay out,

MARC

If you can communicate with VCDS, you can leave it out. If you can't, reinstall it. I have never needed to put it back, but Nyet did.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

marcone

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 41

	Re: r32 no read on bench « Reply #10 on: November 28, 2014, 02:57:17 PM »

ok I will try see how I go thanks a lot

Marc


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 01:21:28 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search