Pages: [1] 2
Author Topic: Different connectors on AEB ECU's?  (Read 15498 times)
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« on: November 16, 2014, 02:27:21 AM »

So, is it a difference with the ecu connector on AEB ECU'S, and which year do they change?
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
turboat
Moderator
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #1 on: November 16, 2014, 03:05:10 AM »

AEB is cable throttle, so presumably me3.8.3? In which case, yes they are different. And whenever they changed to a drive-by-wire engine.
Logged
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #2 on: November 16, 2014, 04:55:47 AM »

My question was not that clear.
I know the things that differs ME7.5    ECU'S, like ecu connector, dbw throttle and so on.

What I want to know if the (only aeb, no me7.5 stuff) AEB ECU's connector differ from each other pending of year? (Audi a4 platform)
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #3 on: November 16, 2014, 05:07:51 AM »

My question was not that clear.
I know the things that differs ME7.5    ECU'S, like ecu connector, dbw throttle and so on.

What I want to know if the (only aeb, no me7.5 stuff) AEB ECU's connector differ from each other pending of year? (Audi a4 platform)

Not that I am aware of.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #4 on: November 16, 2014, 10:26:26 AM »

Hmm.. So every pre-me7.5 ecu on Audi a4 1.8t has the connector type that has like 5 independent connectors?
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 823


« Reply #5 on: November 16, 2014, 10:35:00 AM »

Hmm.. So every pre-me7.5 ecu on Audi a4 1.8t has the connector type that has like 5 independent connectors?

All M38x and M592 Turbo and nonTurbo ECUs uses the same connector. Little differences are only in wiring harness.
Logged
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #6 on: November 16, 2014, 11:23:28 AM »

Aha! So they do have that 1 long and 1 short connector type!
Thank you, now I am 100% sure about AEB ECU's connector type.

So those with 5 independent connectors must be from diesel engines.
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
panos1975
Full Member
***

Karma: +7/-6
Offline Offline

Posts: 105


« Reply #7 on: November 16, 2014, 11:33:02 AM »

5 indepentent connectors? for sure it is not from vag group car,either gasoline,either diesel....
Logged
cerips
Full Member
***

Karma: +3/-2
Offline Offline

Posts: 118


« Reply #8 on: November 16, 2014, 01:44:52 PM »

Are you thinking of something like this?





If so it's from an Audi A8
Logged
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #9 on: November 16, 2014, 03:52:57 PM »

Yes, that's the ecu I'm talking about. But I'm pretty sure i saw that kind of ecu in a Audi a4 when I was at the local junkyard hunting for ECU's.
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #10 on: November 16, 2014, 04:24:40 PM »

Yes, that's the ecu I'm talking about. But I'm pretty sure i saw that kind of ecu in a Audi a4 when I was at the local junkyard hunting for ECU's.

96/97 hitachi 2.8 ecu.
Logged
Terror_Flynn
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 168


« Reply #11 on: November 16, 2014, 08:30:03 PM »

OK, that's good info that I didn't knew.
The car had no engine in it so I didn't look for other clues about what engine the car had, I just looked at the ecu that was still there.
Logged

Audi A4 Avant 1.8t Quattro -2001 (AWT)
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353



« Reply #12 on: November 27, 2014, 03:22:37 AM »

Hitachi ? European AEB did use Motronic 3.2 , it is that in the picture Cheesy and they are not flashable ofcourse

unless i am missing something

Logged

VAG cars newbie tuner Smiley
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 823


« Reply #13 on: November 27, 2014, 05:41:24 AM »

I haven't seen that too  Shocked  Shocked  Shocked  Shocked  Huh  Huh  Huh  Huh
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #14 on: November 27, 2014, 07:11:00 AM »

All (Euro) ecu's up to '97 are 5 plug, from m.y, 97 its the big and small plug. According to my ElsaWin.
It's Bosch M3.2, and is at least also used on the 1.8 20v N/A
Logged

Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)