hello all forum members
bought a v6 4motion model 2000
the orignal instrument cluster had an electrical short at the old owner and swaped into
new (used) instrument cluster, same part number,MOTOMETER brand.
i dont have the part number right now but i will add it asap.
i want to adapt the new (used) instrument and turn off the annoying IMMO light off.
i ordered VAGTACHO cable but didnt got it yet.
if it helps i also have blue vag com cable and vcds 12.12 cable.

my question is
if the old origninal cluster is DEAD, how can i get the SKC to adapt the new(used) instrument ?
i also want to adapt a new key with immo.
the car is cranking and runing because i have HALTECH ecu plugged.
many thanks for your help

so many light got black painted...
this specific light is annoying cause it also blinked
and i'm not sure i can adapt new key (alarm) to my car without adapting the cluster\immo.
i got vcds fault code says somthing about emergency or so on my cluster.
retrieving SKC from ECU, how ?
thanks for quick replay

Thanks for your replay
I hope you are right,
At rosstech wiki page it says i do need the old
SKC number
http://wiki.ross-tech.com/wiki/index.php/Immobilizer_II_Immobilizer_Swapping_%28Instrument_Cluster%29
BTW
This is the cluster part number
1j0920822f

"The Coding from the OLD (ORIGINAL) cluster has been saved"

it is not the SKC code ?

Thanks
Ill try it when i recieve the cable