Check my Log; K04-064 1.8t

Pages: [1]

« previous next »

Author

Topic: Check my Log; K04-064 1.8t (Read 11826 times)

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Check my Log; K04-064 1.8t « on: January 29, 2015, 11:37:53 AM »

Hello there,

This might not be the right section, but I'm gonna put it here because it's a bit of a problem, and I'm not sure how to fix it.

Basically, running the 064 on the 1.8t, which is, btw, a lovely, lovely turbo. It's lovely and torquey down low, and produces lovely power up top.

The problem is, I'm running dangerously lean. I've set knock fuelling very rich, to try and combat any damage that I might cause, but I want it fixed.

I'm running 630cc Bosch injectors, 3 bar FPR, brand new Sytec fuel pump.

KRKTE: 0.05495
TVUB: 0.7521 @ 14.v
1.1575 @ 12.v

It's holding boost as I want it, but I can't dial in timing because I can't get fuel to follow. Trims are good (within 2%).

Attached is the log, you can see it gets dangerously lean as RPM climbs, so I'm not sure if the pump is weak, or if it's tune.

Log supplied is from ME7Logger!

Thanks for any help!

Adam.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Check my Log; K04-064 1.8t « Reply #1 on: January 29, 2015, 12:14:48 PM »

You are out of injector. Look at your duty.

Also, if you really want to run past the map limit (your boost is obviously way over), you should be running a 5120 hacked file.

At minimum you should be logging ps_w to make sure you aren't maxing it out.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Check my Log; K04-064 1.8t « Reply #2 on: January 29, 2015, 12:39:33 PM »

It's running past the MAP limit, I noticed the other day!

It'll throw the TC light if I do a hard pull in >3rd, says MAF limit reached.

I saw the duty though, but Dan reckoned that it was tune, rather than hardware. I obviously saw injector at 100%, but with 630's at 100%, surely should flow more than plenty for 360 brake?

Tempted to get a 4 bar reg.


	Logged

fknbrkn

Hero Member

Karma: +186/-24
Offline

Offline

Posts: 1455

mk4 1.8T AUM

	Re: Check my Log; K04-064 1.8t « Reply #3 on: January 29, 2015, 01:44:34 PM »

check your fuel pressure @WOT


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Check my Log; K04-064 1.8t « Reply #4 on: January 29, 2015, 01:54:19 PM »

With what dyno? Tongue

I'd need to get a gauge or get a dyno! Sad


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Check my Log; K04-064 1.8t « Reply #5 on: January 29, 2015, 01:59:32 PM »

Wait.

If I max ps_w then fueling loses the plot?

So if I pull boost back, fueling should follow what I've asked? I'll go log ps_w, but I know I'm gonna be beyond it. Was hitting 26 psi the other day in 5th, so I know it's gonna be over!


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Check my Log; K04-064 1.8t « Reply #6 on: January 29, 2015, 03:13:56 PM »

Quote from: adam- on January 29, 2015, 01:59:32 PM

If I max ps_w then fueling loses the plot?

Not just fueling... all sorts of stuff goes sideways.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Check my Log; K04-064 1.8t « Reply #7 on: January 29, 2015, 03:14:34 PM »

Quote from: fukenbroken on January 29, 2015, 01:44:34 PM

check your fuel pressure @WOT

And this.


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Check my Log; K04-064 1.8t « Reply #8 on: January 29, 2015, 05:20:42 PM »

I'll start with pulling back boost if it's going above ps_w but I can guess it is! Thanks.

Hopefully that brings fuelling Nd therefore knock into control!


	Logged

4ringpieces

Full Member

Karma: +4/-4
Offline

Offline

Posts: 232

	Re: Check my Log; K04-064 1.8t « Reply #9 on: January 30, 2015, 11:05:05 AM »

You want to remove some timing too, seems as soon as it starts retarding -6-12 or more degrees the fuelling is getting really noisy and spikey, detonation will show as a fast lean mixture on a wideband.

You can see from around 1000rpm to 3000rpm and up to -3 degrees cf, the fuelling isn't spiking lots. Until it hits -6 degrees cf @3500rpm then shit gets spikey.

If you need more base fuel pressure you can tap the top of the current fpr down to increase the base pressure. Can make that 3bar reg 3.5bar and gain a little head room on the inj duty


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: Check my Log; K04-064 1.8t « Reply #10 on: February 04, 2015, 11:16:56 AM »

Quote from: Fordy on January 30, 2015, 11:05:05 AM

That will bomb the fuel pump though if that's the problem.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Check my Log; K04-064 1.8t « Reply #11 on: February 04, 2015, 11:18:54 AM »

Quote from: adam- on January 29, 2015, 05:20:42 PM

I'll start with pulling back boost if it's going above ps_w but I can guess it is! Thanks.

You aren't looking for "boost above ps_w", you're looking for maxed out boost pressure or maxed out ps_w.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 11:48:35 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search