NefMoto > Technical > Flashing and Chipping > Looking to expand - tuning my 2007 A4 2.0Tfsi
Pages: [1] 2 3 ... 6
« previous next »
Author Topic: Looking to expand - tuning my 2007 A4 2.0Tfsi  (Read 53995 times)
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« on: July 26, 2011, 05:49:38 PM »
Has anyone done any work with this platform? Anything to help me get started? What tools? MPPS clone?
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #1 on: July 26, 2011, 05:52:48 PM »
I am in a similar boat with a 2.0T in a 2008 Wolfsburg Jetta.

I have scoured the internet and downloaded lots of things, but haven't had time to really parse any of it.  It looks like the MPPS clones do have trouble in some cases - however the ones manufactured in europe instead of china seem to have less reliability issues.

They also reportedly checksum.

Leaving us to build an XDF.
Logged
thom337
Full Member
***

Karma: +15/-1
Offline Offline

Posts: 81
« Reply #2 on: July 27, 2011, 09:14:40 AM »
MPPS works fine in the car, BDM is best for bench writing.
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #3 on: July 28, 2011, 11:56:19 AM »
Does anyone know a source of a good MPPS clone? I am not a fan of the "direct from china" sites. Are there any affordable BDM tools?
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #4 on: July 28, 2011, 02:21:15 PM »
http://www.amazon.com/v3-0-2-37-Chiptuning-Flasher-EDC15-EDC16/dp/B004QDQE7A/ref=sr_1_1?ie=UTF8&qid=1311888025&sr=8-1
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #5 on: July 28, 2011, 03:47:37 PM »
Quote from: phila_dot on July 28, 2011, 11:56:19 AM
I am not a fan of the "direct from china" sites. Are there any affordable BDM tools?

IMHO it's better to start experiments with MED9 ECU using BDM.
First step make a "photocopy" of original ECU content (Flash/EEPROM/CPU)
Than you can always and anytime 100% recover your ECU to virgin state after any unsuccessfully test und never lost it as "brick".
BDM-100 clones "made in China" are good reliable and affordable.   
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #6 on: July 28, 2011, 09:29:41 PM »
Gremlin, what do you think about this?

http://cgi.ebay.com/ebaymotors/BDM100-Programmer-ECU-Flasher-Chip-Tuning-obd-Tool-_W0QQcmdZViewItemQQhashZitem4aaabe2386QQitemZ320692167558QQptZMotorsQ5fAutomotiveQ5fTools#ht_6020wt_1054

and this:

http://cgi.ebay.com/ebaymotors/BDM100-ECU-spring-loaded-probe-adapter-12-position-_W0QQcmdZViewItemQQhashZitem3a4ecbe3f4QQitemZ250430088180QQptZMotorsQ5fAutomotiveQ5fTools#ht_500wt_956

Thanks!
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #7 on: July 29, 2011, 05:47:37 PM »
Quote from: Jason on July 28, 2011, 09:29:41 PM
Gremlin, what do you think about this?


I bought for experiments visual exactly the same box. It works.
IMHO this box (maybe this concern only my version of box) has one issue.
It have relay inside witch is switched directly from USB supply current.
This may cause аn overcurrent problem for some notebook USB-ports. 
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #8 on: July 29, 2011, 05:58:09 PM »
Look inside...
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #9 on: July 29, 2011, 06:06:13 PM »
Interesting...  Well, I am going to order it!  Let the games begin!
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #10 on: July 29, 2011, 06:33:01 PM »
Quote from: Jason on July 28, 2011, 09:29:41 PM
Gremlin, what do you think about this?

http://cgi.ebay.com/ebaymotors/BDM100-Programmer-ECU-Flasher-Chip-Tuning-obd-Tool-_W0QQcmdZViewItemQQhashZitem4aaabe2386QQitemZ320692167558QQptZMotorsQ5fAutomotiveQ5fTools#ht_6020wt_1054

and this:

http://cgi.ebay.com/ebaymotors/BDM100-ECU-spring-loaded-probe-adapter-12-position-_W0QQcmdZViewItemQQhashZitem3a4ecbe3f4QQitemZ250430088180QQptZMotorsQ5fAutomotiveQ5fTools#ht_500wt_956

Thanks!


Is the adapter from the second link needed?
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #11 on: July 29, 2011, 06:58:20 PM »
I am not sure.  I was trying to get better pics of the small "adapter PCB's" they include in the kit.  I may have found a source in the US for the BDM100 clone - if it is the latest version I'll post up the info.
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709
« Reply #12 on: July 29, 2011, 07:04:31 PM »
Quote from: Jason on July 29, 2011, 06:58:20 PM
I am not sure.  I was trying to get better pics of the small "adapter PCB's" they include in the kit.  I may have found a source in the US for the BDM100 clone - if it is the latest version I'll post up the info.

Great. Thank you. We need to start a trusted sources/sites list.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #13 on: July 30, 2011, 03:36:17 AM »
Quote from: Jason on July 29, 2011, 06:58:20 PM
I was trying to get better pics of the small "adapter PCB's" they include in the kit.  I may have

To deal with MED9.x or any other types ECUs manufactured by Bosch you don't need any of adapter PCB's.
Adapters are using for ECUs made by another manufacturers (Siemens, Marelli, Motorola)
Spring-loaded pins adapter will be useful for Bosch ECUs to connect BDM without soldering. 
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
« Reply #14 on: July 30, 2011, 03:42:24 AM »
Usualy Bosch ECU BDM-port looks on PCB as follows...
Logged
Pages: [1] 2 3 ... 6
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 03:42:10 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 17 queries. (Pretty URLs adds 0s, 0q)