Reading up on how to adjust KFVPDKSE, I note that there is a pressure ratio on the x-axis, but my definition has a less than 1 decimal value. Does the ME9 handle this map differently from ME7?

Here is an ME7 map, notice the axis opposite the rpms varies from 1.065 - 1.60, but in my map it varies from


And here is my map, with the non-rpm axis not matching the format of the ME7 example above.

That is good news. However, I looked at the MED9 FR, and the only funny thing I noted is that I don't think ME9 uses the dynamic map. I still need to compare to ME7 FR and see if it is defined differently.

Also, I checked 3 different mappacks and associated ori files for 3 different versions of ME9.1 and none of them have the KFVPDKSD defined in them. So I am thniking that maybe ME9 uses a separate axis or a scaler to interpret the SE map, and also causes the axis to be different? In each of the 3 mappacks I checked, all had axis values which are all less then 1.