Golf V GTI (MED9.1) what flasher should i use?

Pages: [1]

« previous next »

Author

Topic: Golf V GTI (MED9.1) what flasher should i use? (Read 3517 times)

nobody

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Golf V GTI (MED9.1) what flasher should i use? « on: May 15, 2015, 02:52:27 AM »

Hi,

I have no experience with flashing of petrol VAG cars, so far i had made only vag diesel cars.
I flashed VAG TDIs with MPPS or Fgtech V54 (booth are clones).

Which tool should i use to write to MED9.1 ECU? I read the ori with V54 (tooks over 20min)

Here I read that sometimes the write process fails durning flashing, when that happens what i have to too?
Can i try to reflash without turning the ignition off? I know in this case the egine fan starts blowing on high speed...
Is the ECU in this case able to communicate when the immo data correct? (0x6c00 - 0x6ff0)

Have MED9.1 a Recovery Mode or is Recovery only over BDM100 possible?

Sorry for the many questions, the GTI is my brothers car.


	Logged

ddillenger

Hero Member

Karma: +641/-21
Offline

Offline

Posts: 5640

	Re: Golf V GTI (MED9.1) what flasher should i use? « Reply #1 on: May 15, 2015, 02:45:53 PM »

MPPS is fine.

BDM can be used to recover the ecu with an OBD read (full read), but I would backup the eeprom as well. Getting stuck in programming mode is no fun, having a full backup is good. 6C00 can be read via OBD, but not written.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

nobody

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Golf V GTI (MED9.1) what flasher should i use? « Reply #2 on: May 16, 2015, 01:29:59 AM »

Thank you for your help


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 09:38:42 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search