Pages: 1 2 [3]
Author Topic: Workbench setups help  (Read 14612 times)
TurboWarrior
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 44


« Reply #30 on: July 03, 2015, 03:24:03 AM »

That's the thing in MPPS itself I can't find the ecu listed for ME3.8.3
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #31 on: July 03, 2015, 04:43:46 AM »

That's the thing in MPPS itself I can't find the ecu listed for ME3.8.3

Look for any 1.8T M592 ECU......
Logged
TurboWarrior
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 44


« Reply #32 on: July 03, 2015, 11:48:56 AM »

Won't read it :/
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #33 on: July 03, 2015, 11:51:16 AM »

With MPPS you will be able to ID and WRITE only, M383's ECUs. READ is not possible.
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #34 on: July 03, 2015, 07:31:21 PM »

With MPPS you will be able to ID and WRITE only, M383's ECUs. READ is not possible.

Take a look,
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.03 seconds with 17 queries. (Pretty URLs adds 0s, 0q)