wanted: cheap and decent canbus sniffer

Pages: [1]

« previous next »

Author

Topic: wanted: cheap and decent canbus sniffer (Read 9661 times)

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	wanted: cheap and decent canbus sniffer « on: July 06, 2015, 07:00:28 PM »

looking to purchase a cheap and decent canbus sniffer as a hobby project for something.
whats a good one to look for?

thanks.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: wanted: cheap and decent canbus sniffer « Reply #1 on: July 06, 2015, 10:13:39 PM »

arduino can bus shield?

or http://shop.dieselschrauber.de/can-usb-interface-kit-rks-can-p-313.php


	Logged

seishuku

Full Member

Karma: +13/-0
Offline

Offline

Posts: 131

	Re: wanted: cheap and decent canbus sniffer « Reply #2 on: July 07, 2015, 03:14:03 PM »

I made my own with an STM32F429 Discovery and a $3 chinese CANBus transceiver, total cost of about $30 shipped... Not including the custom firmware and software I had to write. Roll Eyes


	Logged

roth18

Newbie

Karma: +3/-0
Offline

Offline

Posts: 19

	Re: wanted: cheap and decent canbus sniffer « Reply #3 on: July 24, 2015, 08:49:22 PM »

Quote from: k0mpresd on July 06, 2015, 07:00:28 PM

looking to purchase a cheap and decent canbus sniffer as a hobby project for something.
whats a good one to look for?

thanks.

http://www.elrasoft.com/uucan.htm


	Logged

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: wanted: cheap and decent canbus sniffer « Reply #4 on: October 09, 2015, 01:22:09 PM »

Arudino + shield or chipkit.

I'll open source the code if people want to contribute...


	Logged

How to work out values from an A2L

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371

Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=

ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID

ozzy_rp

Jr. Member

Karma: +16/-1
Offline

Offline

Posts: 49

	Re: wanted: cheap and decent canbus sniffer « Reply #5 on: October 09, 2015, 03:33:18 PM »

Quote from: dream3R on October 09, 2015, 01:22:09 PM

Arudino + shield or chipkit.

I'll open source the code if people want to contribute...

It would be great!


	Logged

MED17/EDC17 Reverse engineering
conversion sgo and frf to bin https://osotec.com/

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: wanted: cheap and decent canbus sniffer « Reply #6 on: October 09, 2015, 03:35:02 PM »

Quote from: ozzy_rp on October 09, 2015, 03:33:18 PM

It would be great!

So what kit have you got? I have some old code for ardunio thats serial based also yo can use canhacker with it


	Logged

How to work out values from an A2L

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: wanted: cheap and decent canbus sniffer « Reply #7 on: October 09, 2015, 03:37:48 PM »

Actually the chipkit with the network shield is the way forward, I'll code something raw and open source it when i get my B8 back? Checkout OpenXC too as it's chipkit compatible.

Either that or an arduino setup, problem is only one can controller.

A front end can be done simply too with C# filtering etc no idea in C# I just dumped the raw logs into SQL


« Last Edit: October 09, 2015, 03:41:38 PM by dream3R »	Logged

How to work out values from an A2L

ozzy_rp

Jr. Member

Karma: +16/-1
Offline

Offline

Posts: 49

	Re: wanted: cheap and decent canbus sniffer « Reply #8 on: October 09, 2015, 03:43:01 PM »

Quote from: dream3R on October 09, 2015, 03:35:02 PM

So what kit have you got? I have some old code for ardunio thats serial based also yo can use canhacker with it

I have arduino kit based on MCP2515 and canhacker


	Logged

MED17/EDC17 Reverse engineering
conversion sgo and frf to bin https://osotec.com/

dream3R

Hero Member

Karma: +18/-8
Offline

Offline

Posts: 1194

	Re: wanted: cheap and decent canbus sniffer « Reply #9 on: October 09, 2015, 03:44:14 PM »

Quote from: ozzy_rp on October 09, 2015, 03:43:01 PM

I have arduino kit based on MCP2515 and canhacker

So you're not the OP, what do you want? Canhacker is quite good at sniffing.

I'm confused as what you have is open source lol


« Last Edit: October 09, 2015, 03:56:17 PM by dream3R »	Logged

How to work out values from an A2L

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: wanted: cheap and decent canbus sniffer « Reply #10 on: October 10, 2015, 01:11:02 AM »

If you want a shield I've got one sitting in a box doing nothing after I bought it cause I'm an idiot.

Yours for some beer tokens. But it'll probably cost more in shipping than what you guys can get it for in the States.

Enjoy your crab and beer dude!


	Logged

hackish

Full Member

Karma: +1/-1
Offline

Offline

Posts: 56

	Re: wanted: cheap and decent canbus sniffer « Reply #11 on: October 16, 2015, 11:48:29 PM »

I made a y cable years ago using parts harvested from the scrapyard then used a spare J2534 tactrix cable in sniff mode since it let me capture kline traffic too. I did it this way because it was reliable and the output was easy to parse. I also bought a usbee when they first came out to deal with timing and kline baud changes but honestly, their software and support are garbage.


	Logged

roth18

Newbie

Karma: +3/-0
Offline

Offline

Posts: 19

	Re: wanted: cheap and decent canbus sniffer « Reply #12 on: April 26, 2017, 12:31:18 PM »

Open source project - you can modify firmware according to your needs. If that's what you looking 4.

http://cartools.lv/Shop/product_info.php?cPath=26&products_id=99

Developer ---> http://www.mictronics.de/projects/usb-can-bus/


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 11:19:32 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search