Pages: 1 ... 3 4 [5]
Author Topic: 95% DC, no boost  (Read 65367 times)
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #60 on: December 09, 2015, 01:29:40 PM »

Yes, probably will do that with closed wg (maybe even at around 3000 rpm  Grin)
But stock flash you will see 0.8-0.9 bar at sea level. Never logged one driving up a mountain though.
Logged

nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #61 on: December 09, 2015, 01:45:24 PM »

But stock flash you will see 0.8-0.9 bar at sea level.

If you see stock requesting 95% DC something is wrong.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #62 on: December 09, 2015, 02:10:46 PM »

I responded to this
what i was wondering also is what is a stock 180hp GTI supposed to run boost wise? worst case i'll just revert the car back to stock and start over with it.
Logged

nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #63 on: December 09, 2015, 02:13:05 PM »

I responded to this

Ah sorry. Big misunderstanding.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: 1 ... 3 4 [5]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)