Pages: 1 2 [3]
Author Topic: 3B0907551CJ - Is this map a warm up map?  (Read 19347 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #30 on: September 11, 2015, 09:56:53 AM »

The problem was solved!!!

cold start and warm up works now without missfire

Smiley

thanks for all!!!!

thanks for NefMoto!
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387



« Reply #31 on: September 12, 2015, 12:28:53 PM »

How was the music?

"With a little help from my friends"

 Cheesy
Logged
wannabee900
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 42


« Reply #32 on: September 12, 2015, 12:59:12 PM »

The problem was solved!!!

cold start and warm up works now without missfire

Smiley

thanks for all!!!!

thanks for NefMoto!
I doubt you will get help next time you ask for it if you don't explain what the solution was.
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #33 on: September 12, 2015, 02:28:25 PM »

+1
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #34 on: September 12, 2015, 02:39:36 PM »

I doubt you will get help next time you ask for it if you don't explain what the solution was.

This guy is 80 percent of the way to being purged from these forums entirely. We don't need people bumbling around blindly, and everyone being accepting of it. It sets a bad precedence.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387



« Reply #35 on: September 12, 2015, 05:01:03 PM »

The solution was pretty simple, the injectors was much less flow than he though... Raised krkte and get things better... But he will have much work to do yet
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)