requested lambda doesn't follow lamfa

Pages: [1]

« previous next »

Author

Topic: requested lambda doesn't follow lamfa (Read 5006 times)

Giannis

Full Member

Karma: +11/-1
Offline

Offline

Posts: 176

	requested lambda doesn't follow lamfa « on: August 20, 2011, 01:50:54 AM »

Hello to all i was experimenting in my mafless tune and i while i was doing some logs last night i noticed that requested lambda doesn'n follow lamfa in part throtle conditions but only in WOT. Has anyone any ideas what is happening?


	Logged

judeisnotobscure

Sr. Member

Karma: +38/-10
Offline

Offline

Posts: 379

	Re: requested lambda doesn't follow lamfa « Reply #1 on: August 20, 2011, 02:23:52 AM »

I just double checked the FR and LAMFA is for full load enrichment "when the driver calls for maximum torque over mrfa_w." pg 1025


	Logged

I have a b5 s4
but i just want to dance.

Giannis

Full Member

Karma: +11/-1
Offline

Offline

Posts: 176

	Re: requested lambda doesn't follow lamfa « Reply #2 on: August 20, 2011, 04:30:51 AM »

yes you are right but i think that one axis of lamfa if torque request from KFPED and the other axis is RPM it has no meaning if LAMFA was only for WOT fuelling to has other axis for torque. Correct me if i am wrong. I am trying to enrich my fuel in high load but not WOT conditions. Is there any other way?


	Logged

judeisnotobscure

Sr. Member

Karma: +38/-10
Offline

Offline

Posts: 379

	Re: requested lambda doesn't follow lamfa « Reply #3 on: August 23, 2011, 10:23:24 PM »

The bts maps work, not sure about mafless though.
Kflbts Is the ticket.
I'll have to check the fr to see what other inputs affect bts.


	Logged

I have a b5 s4
but i just want to dance.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 07:39:15 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search