Pages: [1]
Author Topic: Re-flashing a Unitronic flashed ECU for Manual from Auto  (Read 3265 times)
tylerlb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: November 09, 2015, 11:12:17 AM »

I'm pretty sure this is impossible but if i were to upload the 06A 906 032 DL software instead of my 06A 906 032 DM software I would lose the flash on my ECU as it basically re-writes the coding of the original file for alterations right?

I basically need to re-code the Me7.5 ECU for manual but i'd hate to lose the tune. Its just that no one wants a tuned auto ECU.

Any help is greatly appreciated.
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #1 on: November 09, 2015, 05:56:49 PM »

Yes. Flashing the ecu overwrites the calibration, aka, the tune. You can't recode the mk4 ecu.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
fknbrkn
Hero Member
*****

Karma: +185/-21
Offline Offline

Posts: 1447


mk4 1.8T AUM


« Reply #2 on: November 09, 2015, 07:02:18 PM »

you can recode ecu from auto to manual but not at tiptronic ecu
Logged
tylerlb
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #3 on: November 10, 2015, 06:46:33 AM »

Yes. Flashing the ecu overwrites the calibration, aka, the tune. You can't recode the mk4 ecu.

Thats what i was afraid of.

you can recode ecu from auto to manual but not at tiptronic ecu

Apparently that only works for TDI software. Gassers won't save
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)