Pages: 1 [2]
Author Topic: Massive timing retardation + low power  (Read 14865 times)
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #15 on: November 15, 2015, 06:58:27 PM »

bpv, typo. Not much left, especially w/o logs.

possibly collapsed inlet, clogged cats, etc.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #16 on: November 15, 2015, 07:29:47 PM »

bpv, typo. Not much left, especially w/o logs.

possibly collapsed inlet, clogged cats, etc.

Bpv haha okok

Well, a collapsing inlet is one of my thougts, but can it cause timing retardations and become better without maf?

Can he make proper logs with vcds or he needs me7logher? In this last case, impossible.

Ps: He's got a tube instead of cat
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #17 on: November 15, 2015, 07:30:44 PM »

I'm not going to bother guessing anything else; it's an utter waste of time.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #18 on: November 15, 2015, 08:50:54 PM »

What do you consider a "proper log"? What variables?
Logged
wannabee900
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 42


« Reply #19 on: November 16, 2015, 01:59:20 AM »

Tell him to visit a local shop and let them sort out the HW since he is not able to do it himself.
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 388



« Reply #20 on: November 16, 2015, 05:40:37 AM »

1 - MAF readings are to much lower than expect

2 - Lambda is too much rich than expect

3 - Pressure is too much lower than expect

All this indicating an air leak from MAF to turbo, consider verifying DV is not leaking, and all one direction valves under manifold and next TBI.

But as said before without more detailing logs is hard to know...
Logged
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #21 on: November 16, 2015, 08:05:01 AM »

Half-fixed.

The back muffler was clogged. He put a sport one and now it pulls ok. Maf and boost readings are ok but lambdas keep higher than spected.

Maybe the lambda sensor has suffered because of the pressure accumulated in the exhaust and its bad. If we fix it, I'll post the solution. And again, just to make it better in the future: What do you consider a good log? What variables in this case? I assume using me7logger and not vcds..
Logged
wannabee900
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 42


« Reply #22 on: November 16, 2015, 08:11:02 AM »

me7logger, log attached as text format and perhaps optional screenshot from ecuplotx
Variables/memory positions depending on what the symptoms are
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #23 on: November 16, 2015, 08:22:16 AM »

And the cat is now clogged because of all of this extra fuel?
Logged
dgpb
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 176


« Reply #24 on: November 16, 2015, 08:33:54 AM »

And the cat is now clogged because of all of this extra fuel?

No problems with the cat adam, he had a tube instead of it.

Stock:
Catalytic converter, resonator, muffler
Tuned before:
Tube, resonator, muffler
Tuned now:
Tube, resonator, sport muffler

It seems resonator is ok, as he tired first of all by unplugguing the exhaust from the Down pipe, and results are the same as now.
« Last Edit: November 16, 2015, 09:29:42 AM by diegogpb » Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194


« Reply #25 on: December 06, 2015, 10:12:58 PM »

has to be a leak
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.033 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)