Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1???

Pages: [1]

« previous next »

Author

Topic: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? (Read 7297 times)

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « on: November 16, 2015, 07:26:36 PM »

I am trying to connect my K tag to my 7.1.1 ECU for a boot flash. I am not sure where to connect the grey "boot" and grey "CNF1" to the ECU board.

In this link, the bottom picture matches my ECU. am I supposed to use those circled in the picture, and if so, which one is which??
http://s4wiki.com/wiki/Boot_mode

All I am trying to do here is delete the immobilizer.


	Logged

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #1 on: November 17, 2015, 10:08:41 PM »

If anybody could help me, I would so much appreciate it. I have had my ECU sitting on my BDM table for days now waiting and researching to no avail. My K tag software states to hook the wires up a certain way, but the ecu in the pictures is not exactly what I have. The picture is wrong. Sad


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12256

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #2 on: November 17, 2015, 11:35:37 PM »

http://nefariousmotorsports.com/forum/index.php?topic=417.0title=

Please read the stickies.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

wannabee900

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 42

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #3 on: November 18, 2015, 02:30:04 AM »

Quote from: nyet on November 17, 2015, 11:35:37 PM

http://nefariousmotorsports.com/forum/index.php?topic=417.0title=

Please read the stickies.

Stickies can be good but a few of them should really have their subject title edited to be more generic.


	Logged

nitrorocket

Full Member

Karma: +0/-4
Offline

Offline

Posts: 53

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #4 on: November 18, 2015, 05:28:19 PM »

Ive read everything, but my ktag stares to hook up grey alligator clio to boot pcb and blue alligator clamp to"CNF1".

nothing lists those or mentions them at all and anything I read?

Injust wish the instruction were correct! Damn ksuite software!!


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12256

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #5 on: November 18, 2015, 05:38:49 PM »

The galletto tool is free and works with just about every ftdi cable.


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #6 on: November 18, 2015, 05:46:48 PM »

maybe you should contact alientech.
oh wait......


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? « Reply #7 on: November 18, 2015, 06:09:45 PM »

Quote from: k0mpresd on November 18, 2015, 05:46:48 PM

maybe you should contact alientech.
oh wait......


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 16, 2024, 05:02:42 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search