NefMoto > Technical > Tuning > BMW MS43 ECU lambda integrator control
Pages: [1]
« previous next »
Author Topic: BMW MS43 ECU lambda integrator control  (Read 7064 times)
alfachips
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« on: January 12, 2016, 02:23:58 PM »
I search in the ms43 bmw ecu for a lambda map, like LAMFA or LAMBTS of bosch ecus.
I need the lambda integrator at 0% in some rpm and load.
Can anyone help ?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #1 on: January 13, 2016, 12:34:07 AM »
https://drive.google.com/folderview?id=0BybpM7kNcnD5flA0QVdhbEpNbEpabENEbGhBZkVZZWpwT09kVDFMazEzMDhDSWVPRzFPTEU&usp=sharing#list

maybe this will help
i have not read it by now
Logged
Cloudforce
Full Member
***

Karma: +5/-13
Offline Offline

Posts: 106
« Reply #2 on: January 18, 2016, 12:40:54 PM »
Quote from: alfachips on January 12, 2016, 02:23:58 PM
I search in the ms43 bmw ecu for a lambda map, like LAMFA or LAMBTS of bosch ecus.
I need the lambda integrator at 0% in some rpm and load.
Can anyone help ?

There is no such map! Within the boundaries of having lambda closed loop, the ecu will only rely on the lambda sensor voltage to toggle between rich and lean.
Logged
alfachips
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« Reply #3 on: January 19, 2016, 06:47:43 AM »
The only way i found to change the lambda in open loop in different load,
is to change the ID_PVS_FL map.
Logged
Cloudforce
Full Member
***

Karma: +5/-13
Offline Offline

Posts: 106
« Reply #4 on: January 19, 2016, 12:04:38 PM »
Quote from: alfachips on January 19, 2016, 06:47:43 AM
The only way i found to change the lambda in open loop in different load,
is to change the ID_PVS_FL map.

That map defines how much accelerator pedal angle is needed to switch into full-load condition Wink
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #5 on: January 20, 2016, 01:33:26 AM »
Quote from: aef on January 13, 2016, 12:34:07 AM
https://drive.google.com/folderview?id=0BybpM7kNcnD5flA0QVdhbEpNbEpabENEbGhBZkVZZWpwT09kVDFMazEzMDhDSWVPRzFPTEU&usp=sharing#list

maybe this will help
i have not read it by now

I just read the boot mode instructions WTF?  2 people, crocodile clip to ground an probe on pin 24 lol
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #6 on: January 20, 2016, 03:25:44 AM »
Quote from: Cloudforce on January 19, 2016, 12:04:38 PM
That map defines how much accelerator pedal angle is needed to switch into full-load condition Wink

Commercial German Tuner Alert!  lol

Thanks for DPP's I gave you - no
Do these DSG files - so I checkout his email (hidden now) and low and behold A Beemer tuner looking for new tech.

Conclusion meh
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
Cloudforce
Full Member
***

Karma: +5/-13
Offline Offline

Posts: 106
« Reply #7 on: January 20, 2016, 04:07:39 AM »
Quote from: dream3R on January 20, 2016, 03:25:44 AM
Commercial German Tuner Alert!  lol

Thanks for DPP's I gave you - no
Do these DSG files - so I checkout his email (hidden now) and low and behold A Beemer tuner looking for new tech.

Conclusion meh

(redacted due to the contents of personal information)

@alfachips

I suggest moving over to different forum, this is no good for Siemens and especially BMW users. To many ill people hanging around here with questionable ideas...
« Last Edit: January 21, 2016, 03:03:15 PM by ddillenger » Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #8 on: January 20, 2016, 09:43:02 AM »


I was just messing man, don't be so serious Wink (I lol'd)

A thank you would of been nice though, seriously.
« Last Edit: January 21, 2016, 03:38:02 PM by dream3R » Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #9 on: January 20, 2016, 01:05:36 PM »
Getting personal on the forum mate isn't good.   I kindly ask you to edit your comments please.   I don't deserve you making private questions here to be honest.

It was a joke lol, Also look up the term meh.   I didn't make any judgements lol
« Last Edit: January 20, 2016, 01:19:27 PM by dream3R » Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
alfachips
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9
« Reply #10 on: January 21, 2016, 03:11:02 AM »
Sorry but I don't understand, what is the problem that I created ?
Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #11 on: January 21, 2016, 04:41:57 AM »
Quote from: alfachips on January 21, 2016, 03:11:02 AM
Sorry but I don't understand, what is the problem that I created ?


You did not friend.
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 10:37:16 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)