hi all

i have a bit problems recover thies ecu now.

i ask my freind to put in the obd cabel from my KESS to car and i was ready to write. but it make a black out on pc. and i was a bit suprice as i have read/write this car 12 times now, but i then onece to recover it on the kess. but an error was during write it says.
i found out that hi had bende one of the legs on my kess connector in the obd connector. i did without braking it got it straigtn up and then ttyed many ways to recover it but no lock so far.

i have also transdata and good alientech bench but only got the kt04 probe for edc17/med7 , and i tryed to make an adapter of fgtech bosch and pin´s. but i get 00002 error unknow microcontroller by protocol 64

i dont find any info (in transdata) on i have to connect alle (bdm pinout me9.1) k-line/canH-L / 12v IN / 12v ECT. to ecu and still soldering / connect prob to the programmings pads, ?
(also i know the red strib has to be to the left. on the ribbon cabel but wich one of all the cabels is for the soldering part. ) there is no info on web, i looked for discriptions for all cabels)
is there a better way to recover it , in that case i like some inputs.

BR

THX.

a straings thing is that hi first time he came to me had bad batteri and it also then brick but i was abel to recover it over my kess 2 time actuly so why can i not this time ?

also can i use nef soft to flash this ecu? like me7

:-) also what i like some help to. i have tryed so far by transdata but only info for plungin 64 is wite/bluconnector /red strib to L / and probe.

( if anyone have info on wich ribbon cabel for ktag and bosch probe i have to use between,  i be very happy, i can´t find any on gog..
i have pinout for me9.1 but do i have to connect all cabel pinout and soldering/prob on pad´s  at same time? i dont se that in transdata info.?

i have also tryed with my fgtech with cabel pinout and car protocol but also prob and jtag/bdm protocol. but get error wakeup1 and onknow microcontroller.

any info on connection setup i be glad to hear.

can i use nef flash and gllato cabel for this´?