galleto 1260 problem

Pages: [1]

« previous next »

Author

Topic: galleto 1260 problem (Read 6512 times)

volksdude

Newbie

Karma: +2/-0
Offline

Offline

Posts: 16

	galleto 1260 problem « on: September 02, 2011, 10:27:09 PM »

yesterday I was trying to read an me7.5 ecu in bootmode to get the mafless BT file it was containing for learning purposes (wanted to see how they compensate for the loss of maf reader). I'm just wondering if the tuner could have messed with this because I couldn't even get the info out of it, kept having error read0 and errorread 2000 in galleto. I was able to bootmode read 3 different ecu's before and after this one


	Logged

Tony@NefMoto

Administrator
Hero Member

Karma: +132/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: galleto 1260 problem « Reply #1 on: September 18, 2011, 07:39:21 PM »

There is no way to disable boot mode reading and writing. It is possible that a smart encryption socket could corrupt the data read or written to flash memory, but it can't prevent connecting in boot mode.


	Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: galleto 1260 problem « Reply #2 on: October 02, 2011, 10:26:37 AM »

You don't compensate for taking the MAF out.

You must have all your calibrations (fueling) correct and then change a codeword and viola!
Its exactly the same as a car running stock without a MAF. It will just rely on the O2 sensor.


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: galleto 1260 problem « Reply #3 on: October 02, 2011, 10:15:26 PM »

Soooooooooooo What's the codeword


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

coreyj03

Full Member

Karma: +10/-5
Offline

Offline

Posts: 173

	Re: galleto 1260 problem « Reply #4 on: December 01, 2011, 10:11:09 AM »

sometime you have to scrap the boot pad to reveal the metal contact from a coating. then 100% always works.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 01:40:05 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search