Anyone want to help a newb connect to VCDS for first time?

Pages: [1]

« previous next »

Author

Topic: Anyone want to help a newb connect to VCDS for first time? (Read 3983 times)

INControl7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Anyone want to help a newb connect to VCDS for first time? « on: February 01, 2016, 03:04:37 PM »

Bought this cable http://www.ebay.com/itm/USB-cable-for-Triumph-Motorcycles-TuneECU/251088284958?_trksid=p2050601.m2372&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D17614%26meid%3D1842665441241050464%26pid%3D100085%26prg%3D8172%26rk%3D2%26rkt%3D4%26sd%3D170797175486%26%26clkid%3D1842666457672311890&_qi=RTM1562570

Downloaded the most recent drivers from http://www.ftdichip.com/Drivers/D2XX.htm, is there some other drivers im missing?

When i try to connect to VCDS with my cable it says the interface isnt found

I figure i better figure this out before i even try any of the other programs ;(


« Last Edit: February 01, 2016, 04:55:48 PM by INControl7 »	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #1 on: February 01, 2016, 03:10:08 PM »

What version of VCDS are you using?


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Dave9n3

Sr. Member

Karma: +26/-0
Offline

Offline

Posts: 288

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #2 on: February 01, 2016, 03:37:00 PM »

Long shot but have you tried going into the options section and selecting USB, rather than any of the COM options and then test interface?


	Logged

INControl7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #3 on: February 01, 2016, 03:55:44 PM »

VCDS 15.7

Yep, tried all the comm ports and also USB. COMM 2 and USB are found but interface isnt found

am i supposed to be using VCDS lite?


	Logged

INControl7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 11

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #4 on: February 01, 2016, 04:53:59 PM »

Heres what i get from the port test

Ross-Tech usb interface not found!
USB Library version: 3.02.07
Interface: Not Found!


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #5 on: February 01, 2016, 05:14:32 PM »

You cannot use genuine VCDS (ESPECIALLY the most recent up to date version) with anything other than a genuine cable.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

markpowell35

Jr. Member

Karma: +4/-1
Offline

Offline

Posts: 34

	Re: Anyone want to help a newb connect to VCDS for first time? « Reply #6 on: February 02, 2016, 08:44:00 AM »

Try this,

just extract to desktop or C:\ and just run loader, check USB connection and should be ok.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 12:14:43 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search