Pages: 1 2 3 [4]
Author Topic: ME7.1.1/7.5 Programming Not Finished - P0602, P1681 or 18089  (Read 122811 times)
AudiA4_20T
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 18


« Reply #45 on: June 18, 2018, 09:35:02 AM »

Don't mean to bump an old thread, but I have an '05 Passat 1.8T AWM. Ended up having this same issue, I was only doing a read on the ECU, Nefmoto doesn't seem to get the vehicle out of programming mode (DIS lights up PRND432) even if I disconnect. Writing the stock .bin back onto the ECU didn't help, neither did doing another read. I can only drive the car if I clear this code each time I start it.
Logged
fknbrkn
Hero Member
*****

Karma: +185/-23
Online Online

Posts: 1454


mk4 1.8T AUM


« Reply #46 on: June 18, 2018, 02:47:24 PM »

fix it and write back
whats the question?
Logged
AudiA4_20T
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 18


« Reply #47 on: June 19, 2018, 09:18:57 AM »

fix it and write back
whats the question?

The question is how do I fix it? I've tried the "do a read and cycle the ignition" and it doesn't work.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #48 on: June 19, 2018, 09:23:59 AM »

The question is how do I fix it? I've tried the "do a read and cycle the ignition" and it doesn't work.

Read your binary, search for the string, modify it, calculate checksums, write it back. Alternatively, you can write the original file back with a pro tool, and that will resolve the issue as well.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
idzioch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #49 on: May 08, 2019, 03:31:51 AM »

8E0909518AQ - P0602 after NefMoto read.

Write ori flash with KESS resolved the problem...
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #50 on: May 08, 2019, 08:46:47 AM »

The question is how do I fix it? I've tried the "do a read and cycle the ignition" and it doesn't work.

There is an entire thread dedicated to fixing this when the "do a read and cycle the ignition" doesn't work.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 2 3 [4]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)